A neoprene weekender bag is a large soft bag made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that carries clothes and toiletries for a weekend trip or a short holiday. Travel brands, gift shops and fashion stores order it for weekend trips and short travel, because it is light, holds a lot for its weight and folds flat when empty. It is not a wheeled suitcase, so it does not roll the way a cabin case does. Send us your design drawing, the bag size and the handle style, and we will confirm the best material and thickness for weekend trips and short travel.
We manufacture custom neoprene weekender bags in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished weekender bag under one roof, so a change to the bag size or the handles can be checked on a sample before bulk production starts.
A weekender bag is judged by the handles, so the fixings matter more than the print. We cut the bag to your size with carry handles and a shoulder strap stitched through the foam and bar-tacked at the fixing points, because a handle that pulls away with a full bag is the first thing a customer notices. The base is cut wide and flat so the bag stands on a hotel floor instead of tipping over, and a sleeve on the back can be added where you ask for it, so the bag slides over a suitcase handle at the airport.
5 mm is the standard for most weekender bags. It gives a good balance of padding, a firm shape and a bag that still folds flat, which is why most of the weekender bags we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.
| 3 mm | Light weekender bags for a single night and for hand luggage | Least padding; not enough for a full weekend load |
|---|---|---|
| 5 mm | Most weekender bags; weekend trips and short travel | Best balance of padding, a firm shape and a foldable fit |
| 7 mm | Large weekender bags and bags that travel in a car boot | Most padding, but heavier to carry by hand |
Measure the load, not the bag. Tell us what will go inside — the number of outfits, the shoes and the toiletry bag — and we cut the bag to that load: a bag ordered by length alone often comes out too narrow for the shoes, or too tall to fit under an aeroplane seat. Send the size of the largest item too, so the opening is cut wide enough to load it. See our custom weekender bags — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a duffel cut for the gym rather than a weekender cut for a short trip, our neoprene gym duffel bags are the closer page.
SBR is the standard choice for most weekender bags, and CR is the choice where the bag will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a bag used for weekend trips, hotels and short travel. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a bag sold with beach gear or left in the sun.
The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the bag panels without a fight; SBR is firmer and holds the bag flat and square on the floor. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday weekender bags for travel and hotels | Beach, outdoor and premium weekender bags |
If the trip needs a backpack rather than a carry bag, the shape changes: Our neoprene backpacks are cut from the same laminated neoprene, and the two are ordered from different patterns.
Travel brands — a bag printed with your logo that travels with the customer, made to the size your travellers actually pack.
Gift shops — weekender bags for holiday gifts and travel sets, in colours that match the season.
Fashion stores — a bag that photographs well, folds flat for shipping and carries your label, for customers who buy travel bags online.
Corporate gift buyers — a branded weekender as a staff gift or a client gift, in your colours, that is used on every short trip.
When neoprene is NOT the right choice
Tell us which of these your weekender bag needs, and we will build the sample to your drawing.
Will the bag fit under an aeroplane seat?
Tell us the airline size before we cut. A weekender cut to cabin size fits under most seats, but the size limits differ by airline — send the size you need and we will cut the bag to it, so it fits the cabin and the overhead locker.
Can I add a pocket for shoes?
Yes. A separate shoe pocket can be added where you ask for it, so dirty shoes do not touch clean clothes — tell us the shoe size and we cut the pocket to fit it.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the bag size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom weekender bags to your drawing, your size and your print, and we check the handles and the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom weekender bags and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A weekender bag is judged by a weekend packed in one bag. Send us the load size and we will make you a sample to try with real clothes.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.