NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Bags

  • Neoprene Wallets
  • Neoprene Wallets
  • Neoprene Wallets
Neoprene WalletsNeoprene WalletsNeoprene Wallets

Neoprene Wallets

A neoprene wallet is a slim fold made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that holds cash and cards in card slots and a cash pocket for daily carry. Fashion shops, gift shops and accessory brands order it for cash, cards and daily carry, because it is light, folds flat in a pocket and prints well. It is not a card holder, so it holds cash as well as cards. Send us your design drawing, the wallet size and the pocket layout, and we will confirm the best material and thickness for cash, cards and daily carry.

We manufacture custom neoprene wallets in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished wallet under one roof, so a change to the wallet size or the pockets can be checked on a sample before bulk production starts.

A wallet is judged by the pockets, so the layout matters more than the print. We cut the wallet to your size with card slots stitched through the foam, so the cards sit flat and do not slip out, and the cash pocket is cut wide enough for folded notes without bunching. The fold is pressed where the design allows it, so the wallet closes flat in a pocket instead of springing open, and the edges are finished with a bound hem so they do not fray after months of daily use.

 

What thickness of neoprene is best for a wallet?

3 mm is the standard for most wallets. It gives a good balance of a slim shape, a firm hold and a wallet that still fits in a pocket, which is why most of the wallets we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.

3 mmMost wallets; cash, cards and daily carryBest balance of a slim shape and a firm hold in a pocket
5 mmThicker wallets for a padded feel and for more cardsMore padding, but bulkier in a pocket
7 mmPremium wallets and wallets for a structured lookMost structure, but stiff to fold

Measure the cards and the cash, not the wallet. Tell us the number of cards and the note size, and we cut the wallet to that load: a wallet ordered by length alone often comes out too narrow for the cards, or too small to close over the cash. Send the size of the largest note too, so the cash pocket is cut wide enough to hold it. See our custom wallets — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a holder for cards only rather than a wallet for cash and cards, our neoprene card holders are the closer page.

 

SBR or CR neoprene — which is right for wallets?

SBR is the standard choice for most wallets, and CR is the choice where the wallet will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a wallet carried in a pocket or a bag. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a wallet sold with beach gear or left in the sun.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the wallet panels without a fight; SBR is firmer and holds the wallet flat and neat in a pocket. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday wallets for pockets and bagsBeach, outdoor and premium wallets

If the wallet must hold coins as well as cash and cards, the shape changes: Our neoprene coin purses are cut from the same laminated neoprene, and the two are ordered from different patterns.

 

Who is a neoprene wallet for — and who is it not for?

Fashion shops — a wallet printed with your label that customers carry every day, made to your colours and your size.

Gift shops — wallets for birthday gifts and holiday sets, in colours that match the season.

Accessory brands — a wallet in your colours for your own line, made to your exact pocket layout.

Corporate gift buyers — a branded wallet as a staff gift or a client gift, in your colours, that is used every day.

When neoprene is NOT the right choice

  • If the wallet must hold coins only — a coin purse with a zip, not a wallet, is the right product.
  • If the wallet must hold many cards — a larger card holder or a card case fits a big card load better than a slim wallet.
  • If the wallet must be rigid — neoprene is soft and bends, so a hard leather wallet fits a rigid brief better.
  • If the lowest possible unit cost is the whole brief — a thin fabric wallet fits a one-season budget better than a neoprene wallet.

 

Customisation Options

Tell us which of these your wallet needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Pockets: card slots and a cash pocket, laid out to your drawing.
  • Closure: a fold, a snap or a zip where you ask for one, so the wallet closes flat.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

How many cards will the wallet hold?
Tell us the number before we cut. The card slots are laid out to your drawing, so a wallet for four cards is cut differently from a wallet for eight — send the card count and we will lay out the slots to fit them.

Will the wallet stay closed in my pocket?
Yes, if the fold is pressed right. The fold is set so the wallet closes flat in a pocket instead of springing open, and a snap can be added where you ask for it — tell us the load and we will fit the closure to it.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the wallet size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom wallets to your drawing, your size and your print, and we check the pockets and the fold on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom wallets and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The wallet size, and how many cards it must hold
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A wallet is judged every time it comes out of a pocket. Send us the card count and we will make you a sample to try with real cards.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.