We manufacture custom neoprene card holders in our own factory in China, where we have made neoprene products for 15 years, in laminated neoprene (SBR / SCR / CR foam + nylon jersey), 3–8 mm thick, with slim card slots and nothing else, for fashion brands, accessory shops and promotion buyers. Send us your design drawing, holder size and quantities, and we will recommend the material and thickness for your buyers and your use.
| Material Laminated neoprene (SBR / SCR / CR foam + nylon jersey) | Thickness 3–8 mm | Minimum order 200 pieces per design, adjustable | Lead time 15–18 days after sample approval |
A card holder is for the buyer who has stopped carrying cash. It holds a few cards and nothing more, so it can be slimmer than a wallet and fit in a front pocket or a small bag. We cut the holder from laminated neoprene foam, which gives the slim piece a soft body that keeps its shape when cards are slid in and out all day, and the fabric face feels smooth and wipes clean.
The slots are cut to hold cards snugly, so they do not slide out when the holder is turned over, and we usually bind the edges and bar-tack the corners, because those are the points that wear every time the holder is pulled out of a pocket. A small centre pocket takes a folded note for the buyer who still carries one, and the whole holder is light enough to carry in a jacket pocket without a bulge.
Prints go on by sublimation when the artwork covers the whole card holder, or by screen print for a logo on the front. The nylon jersey face takes colour well, so a bold pattern or a brand colour comes out clean, and a woven label can be sewn inside for a quieter finish. Card holders pair with other small carry pieces — see our custom neoprene wallets for the fuller wallet with cash and coin sections, and our custom neoprene coin purses if your buyers want a matching piece for coins.
A card holder is carried in a front pocket, so the choice is between a slim holder that disappears in a pocket and a thicker holder that grips the cards firmly.
3 mm — a slim holder for a few cards. Thin and light, easy to slip into a front pocket, enough body for two or three cards.
5 mm — the most popular choice. Our standard thickness for a card holder, with real grip for a full set of cards, still slim enough for a jacket pocket.
7 mm — the most padded holder for many cards. The thickest holder we make, for buyers whose customers carry a full stack of cards and want the most protection.
Tell us how many cards the holder will carry, and we will recommend the thickness — 3 mm, 5 mm, 7 mm or anything in between up to 8 mm. For the full range, see our neoprene sheet thickness guide, and our neoprene card holders application page for how buyers use it.
| Item | Specification |
|---|---|
| Material | Laminated neoprene (SBR / SCR / CR foam + nylon jersey) |
| Thickness | 3–8 mm |
| Card slots | Slim slots for cards, both sides |
| Centre pocket | Small pocket for a folded note |
| Shape | Slim flat body |
| Edges | Bound edges, bar-tacked corners |
| Size | Fits a front pocket or small bag |
| Logo | Sublimation, screen print, woven label |
| Application | Cards and light daily carry |
| Fashion brands — your own holder size, your own colours, your own slot count, made to your tech pack. | Accessory shops and retailers — card holders in your house colours, packed ready for the shelf, in the styles your customers ask for. |
| Promotion and event sellers — holders printed with a company logo, for giveaways and loyalty sets. | E-commerce sellers — mixed sizes and colours of card holders in one order, with barcode and hangtag on request. |
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
Is a card holder different from a wallet?
Yes. A card holder has only card slots and a small centre pocket, so it is slimmer and smaller. A wallet adds a full cash pocket and a coin section for buyers who carry everything.
Will the cards fall out?
No — the slots are cut to hold cards snugly. Tell us how many cards your buyers carry and we will size the slots to match.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order. Mixed sizes can share one design.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing, the holder size and slot count, and we will confirm the sample details.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send your design drawing, the holder size and slot count you need, and the quantity. We confirm the material, thickness and price, then make a sample of the card holder for your approval before bulk production.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.