NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Wetsuits

  • Neoprene Swim Goggle Cases
  • Neoprene Swim Goggle Cases
  • Neoprene Swim Goggle Cases
Neoprene Swim Goggle CasesNeoprene Swim Goggle CasesNeoprene Swim Goggle Cases

Neoprene Swim Goggle Cases

A neoprene swim goggle case is a compact hard-shell case made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that holds one pair of swim goggles to protect the lenses against scratches and knocks. Swim shops, sports brands and gift companies order it for swim goggles and swim gear, because the lenses scratch easily in a swim bag and the case keeps them safe. It holds one pair only. Send us your design drawing, the goggle size and the case style, and we will confirm the best material and thickness for swim goggles and swim gear.

We manufacture custom neoprene swim goggle cases in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished swim goggle case under one roof, so a change to the goggle size or the closure can be checked on a sample before bulk production starts.

A swim goggle case is judged by the lenses, so the inside matters more than the outside. We cut the case to the goggle size with a soft fabric face inside, so the lenses sit without catching, and the compact shell follows the goggle shape so the case does not press on the glass. The zip is placed so its teeth never touch the lenses when the case is opened and closed, and the whole case wipes clean after a swim.

 

What thickness of neoprene is best for a swim goggle case?

3 mm is the standard for most swim goggle cases. It gives a good balance of padding, a compact shape and a case that still fits in a swim bag, which is why most of the swim goggle cases we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.

3 mmMost swim goggle cases; pool swimming and daily useBest balance of padding and a compact fit in a swim bag
5 mmSwim goggle cases for a busy bag and for travelMore padding, but bulkier in a swim bag
7 mmPremium swim goggle cases and cases for rough travelMost padding, but bulky for everyday use

Measure the goggles, not the case you already own. Measure the full width of the goggles and the height from the top of the frame to the bottom, and tell us whether the goggles are racing or training style: a case ordered by goggle name alone often fits the width and presses on the lenses, or fits the lenses and gaps at the sides. See our custom swim goggle cases — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a case cut for sunglasses rather than a case cut for swim goggles, our neoprene sunglasses cases are the closer page.

 

SBR or CR neoprene — which is right for swim goggle cases?

SBR is the standard choice for most swim goggle cases, and CR is the choice where the case will be used in seawater. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a case used at a pool or on a beach holiday. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a case sold with sea swimming gear or used in salt water every day.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the goggle shape without a fight; SBR is firmer and holds the case firm and compact in a swim bag. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday swim goggle cases for pools and holidaysSea swimming and premium swim goggle cases

If the swim cap needs a case rather than the goggles, the shape changes: Our neoprene swim caps are cut from the same laminated neoprene, and the two are ordered from different patterns.

 

Who is a neoprene swim goggle case for — and who is it not for?

Swim shops — swim goggle cases in your colours for the goggles you sell, made to fit your goggle sizes exactly.

Sports brands — a case printed with your logo that swimmers carry to every session, made to your design.

Swim schools — cases for your students, so the goggles survive the term and your name is seen on every bag.

Gift companies — a branded swim goggle case as a gift for swimmers, in your colours, for birthdays and holidays.

When neoprene is NOT the right choice

  • If the case must hold two pairs — a larger case or two cases, not a single-pair case, is the right product.
  • If the goggles need hard drop protection — neoprene cushions knocks, but a hard case protects against a hard fall onto concrete.
  • If the case must be rigid — neoprene is soft and bends, so a hard shell case fits a rigid brief better.
  • If the lowest possible unit cost is the whole brief — a thin fabric pouch fits a one-season budget better than a neoprene case.

 

Customisation Options

Tell us which of these your swim goggle case needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Shape: a compact hard shell cut to your goggle width and height.
  • Clip: a clip or a loop where you ask for one, so the case hangs from a swim bag.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will the case fit racing goggles as well as training goggles?
No, not from the same pattern. Racing goggles are smaller and flatter than training goggles, so each style needs its own cut — tell us which styles you need and we will make a pattern for each.

Can I rinse the case after a swim?
Yes. The whole case wipes clean with fresh water and dries flat, so chlorine or salt does not build up in the foam — rinse it after the swim and let it dry out of the sun.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the goggle size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom swim goggle cases to your drawing, your size and your print, and we check the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom swim goggle cases and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The goggle width and height, racing or training style
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A swim goggle case is judged by lenses arriving unscratched. Send us the goggle size and we will make you a sample to try with real goggles.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.