NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Wetsuits

  • Neoprene Changing Mats
  • Neoprene Changing Mats
  • Neoprene Changing Mats
Neoprene Changing MatsNeoprene Changing MatsNeoprene Changing Mats

Neoprene Changing Mats

A neoprene changing mat is a waterproof mat made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that a surfer or swimmer stands on to change after a session, then pulls closed with a drawstring to pack the wet gear away. Surf shops, swim brands and outdoor stores order it for changing after surfing and swimming, because it keeps feet off cold concrete and packs the wet wetsuit away in one bag. It is not a yoga mat, so it is not cut for the same flat floor work as a yoga mat. Send us your design drawing, the mat size and the drawstring style, and we will confirm the best material and thickness for changing after surfing and swimming.

We manufacture custom neoprene changing mats in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished changing mat under one roof, so a change to the mat size or the drawstring can be checked on a sample before bulk production starts.

A changing mat is judged by the drawstring, so the pack matters more than the print. We cut the mat to your size with a drawstring edge stitched through the foam, so the mat pulls closed into a bag that holds the wet wetsuit, and the waterproof face keeps the water inside instead of soaking the car boot. The whole mat wipes clean after a session, and the foam does not soak up water the way a cotton towel does.

 

What thickness of neoprene is best for a changing mat?

5 mm is the standard for most changing mats. It gives a good balance of cushioning, a waterproof face and a mat that still packs small, which is why most of the changing mats we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.

3 mmLight changing mats for a quick change and for travelLeast cushioning; not enough for standing on cold concrete
5 mmMost changing mats; surfing, swimming and beach daysBest balance of cushioning, a waterproof face and a packable fit
7 mmLarge changing mats and mats for cold winter concreteMost cushioning, but heavier to carry to the beach

Measure the stance, not the mat. Tell us the foot space you need to stand and change, and we cut the mat to that space: a mat ordered by length alone often comes out too narrow to stand on, or too small to pack the wetsuit away. Send the wetsuit size too, so the drawstring bag is cut large enough to hold it. See our custom changing mats — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a mat for lying on the beach rather than a mat for standing to change, our neoprene beach mats are the closer page.

 

SBR or CR neoprene — which is right for changing mats?

SBR is the standard choice for most changing mats, and CR is the choice where the mat will be used in seawater. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a mat used at a pool or on a beach holiday. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a mat sold with surf gear or used in salt water every day.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it gives under bare feet and springs back; SBR is firmer and holds the mat flat and square on the ground. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday changing mats for pools and beachesSurfing, sea and premium changing mats

If the mat must cover a whole beach day rather than a quick change, the shape changes: Our neoprene yoga mats are cut from the same laminated neoprene, and the two are ordered from different patterns.

 

Who is a neoprene changing mat for — and who is it not for?

Surf shops — changing mats in your colours for surfers who change on cold concrete, made to your size.

Swim brands — a mat printed with your logo that swimmers use after every session, made to your design.

Outdoor stores — mats for beach days and wild swimming, where a dry place to change matters more than a towel.

Surf schools — mats for your students, so they change in comfort and your name is seen on every beach.

When neoprene is NOT the right choice

  • If the mat must be a yoga mat — a yoga mat is cut for flat floor work, not for standing to change and packing wet gear.
  • If the mat must be very large — a beach mat fits a full day lying down better than a changing mat.
  • If the mat must be fully waterproof — neoprene resists splashes, but a changing mat is not a dry bag and will not keep water out in rain.
  • If the lowest possible unit cost is the whole brief — a thin plastic changing mat fits a one-season budget better than a neoprene mat.

 

Customisation Options

Tell us which of these your changing mat needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Drawstring: a drawstring edge stitched through the foam, so the mat pulls closed into a bag.
  • Face: a waterproof face where you ask for it, so water stays inside the packed mat.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will the mat hold my wet wetsuit after I change?
Yes, if the drawstring is cut right. The mat pulls closed into a bag that holds the wet wetsuit, so the car boot stays dry — send the wetsuit size and we will cut the mat large enough to pack it.

Can I stand on the mat barefoot on cold concrete?
Yes. The foam cushions bare feet on cold concrete, so the change is comfortable even on a winter morning — a 5 mm mat is the standard for standing, and a 7 mm mat is warmer still.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the mat size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom changing mats to your drawing, your size and your print, and we check the drawstring and the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom changing mats and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The mat size, and the wetsuit size it must pack
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A changing mat is judged by a dry car boot after a surf. Send us the mat size and we will make you a sample to try after a real session.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.