NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Applications

  • Neoprene Quilted Fabric
  • Neoprene Quilted Fabric
  • Neoprene Quilted Fabric
Neoprene Quilted FabricNeoprene Quilted FabricNeoprene Quilted Fabric

Neoprene Quilted Fabric

Neoprene quilted fabric is laminated neoprene (SBR, SCR or CR foam + a quilted face), usually 3 mm thick, stitched in a diamond pattern that pads the surface, for padded bags and fashion goods that must look quilted and still cushion what is inside. Fashion brands, bag makers and luxury makers order it for the outer face of bags and fashion goods where the quilted look is the point. Bag makers buy it as quilted sheets and cut it to their pattern; it is not a finished bag. Send us your design drawing, the products the fabric is cut for and the thickness, and we will confirm the best foam grade and thickness for padded bags and fashion goods.

We make quilted fabric in our own factory in China, where we have made neoprene products for 15 years. We foam the rubber, split the sheet to thickness and laminate the quilted face under one roof, so a change to the thickness or the face can be checked on a sample before bulk production starts.

A quilted face has to hold its diamonds, so the stitching matters more than the colour. We quilt the face to the foam under heat and pressure, so the diamonds stay even across the sheet, and the foam is split to the thickness you ask for, so every sheet in the order cuts the same. The diamond pattern pads the surface, so a bag cushions what is inside without extra lining.

The fabric is commonly supplied as flat sheets, because a flat sheet cuts cleanly on a maker's table and keeps the diamonds lined up across panels. The foam grade can be SBR for everyday lines, SCR for more stretch or CR for outdoor use, and the whole sheet wipes clean after cutting. We check the finished fabric by cutting a bag panel from it and stitching it, because a quilted face that loses its diamonds at the seam is a face that ends up in the offcut bin.

 

What thickness of neoprene is best for quilted fabric?

3 mm is the standard for most quilted fabric. It gives a good balance of padding, a diamond pattern and a face that still sews cleanly. For the full range, see our neoprene sheet thickness guide.

2 mmLight padded bags and fashion goods where the pattern matters mostLeast padding; not enough for a product that must also protect
3 mmMost quilted fabric; padded bags and fashion goodsBest balance of padding, a diamond pattern and an easy sew
5 mmHeavy padded bags, work goods and fashion goods that take a beatingMost padding, but heavier and stiffer to cut and sew

Measure the product, not the fabric name. Measure the largest panel the fabric must cover and the diamond size the design needs, and tell us whether the product is sewn or glued: fabric ordered by name alone often fits the panel and cuts a diamond in half, or fits the diamonds and pulls short at the edge. See our custom quilted fabric — made to your thickness and size for the styles this thickness choice applies to. For a neoprene sherpa fabric face rather than a quilted fabric face, see our neoprene sherpa fabric.

 

SBR or CR neoprene — which is right for quilted fabric?

SBR is the standard foam under a quilted face, and CR is the choice where the finished product will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a padded bag or fashion product used indoors or on land. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a padded bag or fashion product sold for travel and use in the sun.

Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it moves with the product without a fight; SBR is firmer and holds a bag's shape when it is hung up to dry.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday padded bags and fashion goodsTravel and premium quilted bags and goods

If the face needs a sherpa pile rather than quilting, the product changes: our neoprene sherpa fabric feel deep and warm for winter coats and linings, and a quilted face and a sherpa face are ordered from different sheets.

 

Who is neoprene quilted fabric for — and who is it not for?

Fashion brands — quilted-faced sheets in your colours, cut to your panel sizes, for bags that look quilted.

Bag makers — a quilted face for padded bags, made to your thickness, for products where the quilted look is the point.

Luxury makers — quilted-faced sheets for premium fashion goods, made to fit your range exactly.

Gift companies — quilted-faced sheets for branded fashion goods, so your client's name looks at home on a luxury product.

When neoprene is NOT the right choice

  • If the finished product needs a plain face — a nylon or jersey face costs less than a quilted face.
  • If the padding must be very thick — a foam block suits deep padding better than a quilted face.
  • If the fabric is only for a lining — a thinner, lighter face fits a lining brief better than a 3 mm laminated sheet.
  • If the lowest possible unit cost is the whole brief — an unlaminated foam sheet fits a one-season budget better than a quilted-faced sheet.

 

Customisation Options

Tell us which of these your quilted fabric needs.

  • Print: screen print for spot logos on the quilted face, where the diamonds allow it.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Thickness: 2 mm, 3 mm or 5 mm, split to your order.
  • Foam grade: SBR, SCR or CR foam under the face, to your design.
  • Sheet size: cut to your panel size, or supplied as full sheets.
  • Packaging: flat sheets as standard; rolls on request.

 

Frequently Asked Questions

Will the diamonds line up across the seam?
Yes, if the panels are cut right. We cut the panels with the diamonds lined up across the seam, so the quilted look runs across the finished bag — tell us the product and we check the diamonds on the sample.

Can the diamonds be made bigger or smaller?
Yes. Diamond size is quilted to your drawing — tell us the size you need and we confirm the pattern before sampling.

What is the minimum order?
20 sheets per order as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and the thickness you need and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the thickness and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We supply quilted fabric to your thickness, your print and your size, and we check the the diamonds on a sample on a sample before bulk production. The general minimum order is 20 sheets per order as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom quilted fabric and we will confirm the best foam grade and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The finished products the fabric is cut for
  3. The diamond size you need
  4. Foam grade — SBR, SCR or CR
  5. Print and colours
  6. Packaging — flat sheets or rolls

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A quilted face is judged on the finished bag, not on a roll. Send us the product size and we will make you a sample sheet to cut.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.