Neoprene metallic fabric is laminated neoprene (SBR, SCR or CR foam + a metallic face), usually 3 mm thick, that shines like metal, for fashion bags and stage goods that must catch the light without the weight of real metal. Fashion brands, stage suppliers and bag makers order it for the outer face of products where the shine is the point. Fashion makers buy it as metallic sheets and cut it to their pattern; it is not a finished bag. Send us your design drawing, the products the fabric is cut for and the metallic colour, and we will confirm the best foam grade and thickness for fashion bags and stage goods.
We make metallic fabric in our own factory in China, where we have made neoprene products for 15 years. We foam the rubber, split the sheet to thickness and laminate the metallic face under one roof, so a change to the thickness or the face can be checked on a sample before bulk production starts.
A metallic face has to shine evenly, so the metallic coat matters more than the colour. We coat the metallic finish on the face before lamination, so the shine does not flake off when the foam is cut and sewn, and the foam is split to the thickness you ask for, so every sheet in the order cuts the same. The metallic face catches the light from every angle, so a fashion bag shines across the room.
The fabric is commonly supplied as flat sheets, because a flat sheet cuts cleanly on a maker's table and keeps the shine even across panels. The foam grade can be SBR for everyday lines, SCR for more stretch or CR for outdoor use, and the whole sheet wipes clean after cutting. We check the finished fabric by cutting a bag panel from it and stitching it, because a metallic face that flakes at the seam is a face that ends up in the offcut bin.
3 mm is the standard for most metallic fabric. It gives a good balance of shine, colour and a face that still sews cleanly. For the full range, see our neoprene sheet thickness guide.
| 2 mm | Light fashion bags and stage goods where shine matters most | Least padding; not enough for a product that must also protect |
|---|---|---|
| 3 mm | Most metallic fabric; fashion bags and stage goods | Best balance of shine, colour and an easy sew |
| 5 mm | Heavy stage goods, work bags and fashion goods that take a beating | Most padding, but heavier and stiffer to cut and sew |
Measure the product, not the fabric name. Measure the largest panel the fabric must cover and the shine area the design needs, and tell us whether the product is sewn or glued: fabric ordered by name alone often fits the panel and cuts the shine short at the edge, or fits the shine and pulls short at the seam. See our custom metallic fabric — made to your thickness and size for the styles this thickness choice applies to. For a neoprene glitter fabric face rather than a metallic fabric face, see our neoprene glitter fabric.
SBR is the standard foam under a metallic face, and CR is the choice where the finished product will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a fashion bag or stage product used indoors or on stage. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a fashion bag or stage product sold for outdoor shows and use in the sun.
Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it moves with the product without a fight; SBR is firmer and holds a bag's shape when it is hung up to dry.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday fashion bags and stage goods | Outdoor, stage and premium metallic bags and goods |
If the face needs glitter sparkle rather than a metallic shine, the product changes: our neoprene glitter fabric sparkle under stage lights for dancewear and fashion bags, and a metallic face and a glitter face are ordered from different sheets.
Fashion brands — metallic-faced sheets in your colours, cut to your panel sizes, for bags that shine across the room.
Stage suppliers — metallic-faced sheets for stage goods, made to fit your range exactly, so every product catches the light.
Bag makers — a metallic face for fashion bags, made to your thickness, for products where the shine is the point.
Gift companies — metallic-faced sheets for branded fashion goods, so your client's name shines on any product.
When neoprene is NOT the right choice
Tell us which of these your metallic fabric needs.
Will the metallic finish flake off when the fabric is cut?
No, not if the coat is done right. We coat the metallic finish on the face before lamination, so the shine does not flake off when the foam is cut and sewn — tell us the product and we check the finish on the sample.
Can you make the metallic face in our brand colour?
Yes. Gold, silver and copper are standard, and custom metallic colours are made on request — send the colour with your drawing and we confirm it before sampling.
What is the minimum order?
20 sheets per order as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and the thickness you need and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the thickness and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We supply metallic fabric to your thickness, your print and your size, and we check the the shine on a sample on a sample before bulk production. The general minimum order is 20 sheets per order as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom metallic fabric and we will confirm the best foam grade and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A metallic face is judged across the room, not on a roll. Send us the product size and we will make you a sample sheet to cut.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.