NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Diving Equipment

  • Neoprene Fin Socks
  • Neoprene Fin Socks
Neoprene Fin SocksNeoprene Fin Socks

Neoprene Fin Socks

A neoprene fin sock is a sock worn inside a fin, made from laminated neoprene (SBR / SCR / CR foam + fabric), 3 mm thick. Divers and snorkellers wear one so the fin does not rub the foot raw, and it adds a little warmth in cold water. It is not a dive boot. Send us your design drawing, the fin type and the size range, and we will confirm the best material and thickness for your socks.

We manufacture custom neoprene fin socks in our own factory in China, where we have made neoprene products for 15 years. The sock is cut from laminated neoprene and stitched so it fills the gap between foot and fin, stops blisters, and slides into the fin pocket without bunching up.

The sole seam is where a fin sock fails first: a seam ridge under the foot rubs with every kick, and a blister forms exactly where the ridge sits. We join the panels with flatlock stitching and keep the seams off the sole, so there is no hard ridge to rub against the foot during a long swim.

The top edge is bound, so it stays in place and does not roll down inside the fin. Low-cut and ankle-height versions are both made to your drawing, and the sock dries after a dive, ready for the next guest or the next day.

The fit matters more than anything else here. A sock that is too loose slides around inside the fin, and one that is too tight is hard to pull on, so we grade the socks to within 2 mm of your size chart and check the fit against the fin pocket size you send us.

 

What thickness of neoprene is best for fin socks?

3 mm is the standard for fin socks. A fin sock has to fit inside a fin, so it stays thin by design: enough foam to stop fin rub and add a little warmth, without making the fin feel tight.

ThicknessBest forTrade-off
3 mmThe standard — warm water, snorkelling, short swimsLeast warmth; thin cushioning on a long dive
5 mmRecreational diving, full days in the waterFills the fin pocket more; needs a fin with room to spare
7 mmCold water, long dives, maximum warmthTightest inside a fin; divers may need to size their fins up

Measure the foot and the fin pocket, not the shoe size. Stand on a sheet of paper, mark the heel and the longest toe, and measure that length — then measure the inside length and width of the fin pocket the sock must slide into. Send both numbers with your drawing, and we will check the fit before sampling. For the full chart across all uses, see our neoprene sheet thickness guide, and see our custom neoprene fin socks for the heights we make.

 

SBR or CR neoprene — which is right for fin socks?

SBR is the standard choice for fin socks. It is soft, stretchy and comfortable against the foot, and it is easy to sew into a thin sock that slides into a fin. CR resists sun, ozone and salt water better, so we recommend it for socks used every day in the sea and dried in the sun. Our CR foam measures 3–5° Shore C hardness and 276.32 kg/m³ density; our SBR (10–15°) measures 10–15° hardness and 158.34 kg/m³. SCR sits between the two: tougher than SBR outdoors, easier to sew than CR.

SBRCR
CostThe usual choice; keeps the unit cost down for tour operators and schoolsCosts more than SBR; chosen where daily sea use justifies it
UV and ozone resistanceFair; fine for holiday snorkelling and pool useStrong; holds up better in sun and salt air
Water useWater-resistant; adds a little warmth in cool waterWater-resistant too; chosen for daily salt-water diving
Best forSnorkel tours, swim schools, holiday divingDive schools, daily divers, boat crews

Either foam is laminated with a nylon jersey face that slides easily into a fin pocket without catching.

 

Who is a fin sock for — and who is it not for?

Dive shops — a pair of fin socks sold with every set of fins, in your colours, for divers who swim for hours and come back without blisters.

Snorkel tour operators — a pair for every guest, so nobody comes back with blistered feet after a day on the reef, in sizes that cover the whole group.

Swim schools — socks for students who train with fins, where comfort matters through a long lesson and the socks are washed and worn again day after day.

Dive brands — your own logo on a fin sock that matches your fins and your suits, made to your fin type and size range.

When neoprene is NOT the right choice: a fin sock is a thin sock for inside a fin. It is the wrong pick when the brief needs something else:

  • Walking on rocks and decks — a sock has no sole, so a diver who walks on shore needs a boot; see our neoprene dive boots.
  • Warmth for the whole body — a sock warms the foot only; for the suit itself, see our neoprene diving wetsuits.
  • A cheap throwaway sock — a thin cotton or nylon sock costs less than a laminated neoprene sock, though it will not stop fin rub as well.

 

Customisation Options

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Height: low-cut or ankle height, to your design.
  • Sizes: graded to your own size range.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Do fin socks stop blisters on a long snorkel day?
Yes — that is their main job. A bare foot rubs against the hard fin pocket with every kick, and a blister forms where the fin edge presses. A fin sock puts a soft neoprene layer between foot and fin, and because the seams sit off the sole, there is no ridge inside to rub either.

Should a fin sock be low-cut or ankle-height?
It depends on where the fin rubs. A low-cut sock suits a fin with a low pocket and a swimmer who wants the lightest feel. An ankle-height sock suits a fin that presses higher on the foot, or a diver who wants a little more warmth around the ankle — tell us your fin model and we will recommend the height.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order. Tell us your actual quantity and the size split in the enquiry and we will confirm whether it works for your socks.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and fin type and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation. Larger orders or extra custom work can take a little longer, and we will confirm the date with you before bulk production starts.

How do I order?
Send us your design drawing, the fin type and the size range. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

Ready to order? Our minimum order is 200 pieces per design as a general minimum, adjustable to your actual order. We support sampling, usually in 5–7 days, and bulk production usually takes 15–18 days after sample approval. Request a quote for our custom neoprene fin socks and we will confirm the material, thickness and price for your divers.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. Fin type and pocket size
  3. Size range
  4. Thickness or material preference (SBR, SCR or CR)
  5. Logo and colours
  6. Packaging requirements

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

Send the list above and we will come back with a sample plan and a quote for your fin socks.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.