NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Bags

  • Neoprene Fashion Tote Bags
  • Neoprene Fashion Tote Bags
  • Neoprene Fashion Tote Bags
Neoprene Fashion Tote BagsNeoprene Fashion Tote BagsNeoprene Fashion Tote Bags

Neoprene Fashion Tote Bags

A neoprene fashion tote is an everyday bag made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that holds its shape for shopping, work and going out. Fashion brands, gift shops and retail chains order it for the look as much as the load. It is not a structured briefcase. Send us your design drawing, bag size and print, and we will confirm the best material and thickness for your tote.

We manufacture custom neoprene fashion tote bags in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished tote under one roof, so a change to the print or the handle length can be checked on a sample before bulk production starts.

The foam gives a tote a soft, structured body that stands up on its own instead of collapsing, and it cushions the things inside, from a phone to a book, while the bag is carried all day. Each tote is cut from laminated neoprene, stitched with handles in the length you ask for, and finished with an open top or a zip top to your drawing.

The handles are the part that fails first on a fashion tote, so we stitch each handle through the body panel and bar-tack the fixing points, and we check the finished bag by lifting it by its handles with the load inside. Inside pockets can be added for a phone, keys and a wallet, so small things do not sink to the bottom, and the bag wipes clean after a spill.

The fabric face takes printed colours and patterns cleanly, which is why a fashion label treats the tote as part of its collection. We print the artwork across the face before the panels are cut, so a pattern that should run edge to edge does not stop short at a seam.

 

What thickness of neoprene is best for a fashion tote?

5 mm is the standard for most fashion totes. It gives a good balance of shape, cushioning and a tote that stands up on its own, which is why most of the fashion totes we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.

ThicknessBest forTrade-off
3 mmLight shopping totes that fold away; a soft drapeLeast shape; collapses when set down empty
5 mmMost everyday fashion totes; shopping, work and going outBest balance of shape, cushioning and weight on the shoulder
7 mmTotes carried every day with heavier things insideMost shape and cushioning, but heavier to carry all day

Measure the largest thing that goes inside, not the word "large". Lay your book, tablet or laptop flat, measure its length and width, and add room for a phone and keys — a tote ordered by name alone often arrives too narrow for the item it was bought to carry. See our custom fashion tote bags — open top or zip top, 3–8 mm, printed to your artwork for the styles this thickness choice applies to. For a tote built for the beach rather than the street, our neoprene beach tote bags use an open top and longer handles.

 

SBR or CR neoprene — which is right for a fashion tote?

SBR is the standard choice for most fashion totes, and CR is the choice where the tote will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a tote carried to work, to the shops and around the city. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a tote sold with outdoor gear or used at the beach.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it drapes better on a large tote; SBR is firmer and holds the tote's shape when it is set down. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for city use and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for rain and wiping clean after a spillBetter for repeated wet use and seaside use
Best forEveryday fashion totesOutdoor and premium totes

A tote is often ordered with a bag that is carried differently: our neoprene backpacks carry the same load on two shoulders, with a laptop compartment, for customers who walk further or carry more.

 

Who is a neoprene fashion tote for — and who is it not for?

Fashion brands — your seasonal pattern printed on a tote your customers carry every day, made to your design and colours.

Gift shops — a branded tote sold as part of your own collection, for customers who want a bag that looks good and lasts.

Retail chains — a shopping tote with your name on it, ordered in volume, that customers keep and reuse instead of throwing away.

Event and promotion sellers — a tote as a conference or event bag, printed with the event artwork, that goes home with every guest.

When neoprene is NOT the right choice

  • If the bag must hold a rigid shape like a briefcase — neoprene is soft, so a hard-framed bag fits that brief better.
  • If the load is heavy every day — a tote carried on one shoulder is not the right shape for heavy books or equipment.
  • If the bag is for the beach — sand, wet towels and sunscreen call for a beach tote with an open top, not a fashion tote.
  • If the lowest possible unit cost is the whole brief — a cotton or non-woven tote fits a one-event giveaway budget better than a neoprene bag.

 

Customisation Options

Tell us which of these your tote needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Print: your pattern or artwork printed across the fabric face.
  • Size: made to your size, from a small daily tote to a large shopping tote.
  • Top and pockets: open top or zip top, with inside pockets where you ask for them.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Does the bag stand up on its own?
Yes. The neoprene foam gives the tote a soft, structured body that holds its shape instead of collapsing when it is set down.

Can my pattern print across the whole bag?
Yes. We print the artwork across the fabric face before the panels are cut, so a pattern that should run edge to edge does not stop short at a seam — send the full artwork with your drawing.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and print and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the bag size and the print you want. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make fashion totes to your artwork, your size and your handle length, and we check the print and the handles on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom fashion tote bags and we will confirm the best material and thickness for your tote.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The bag size — length, width and depth
  3. The print or pattern you want across the face
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A fashion tote is bought with the eyes first, so print and shape decide the order. Send us the artwork and the size and we will make you a sample to carry.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.