Neoprene cotton fabric is laminated neoprene (SBR, SCR or CR foam + a cotton face), usually 3 mm thick, that feels natural and soft on the hand, for casual bags, covers and home goods that must look and feel like cloth rather than rubber. Bag makers, home brands and casual fashion makers order it for the outer face of everyday products where a natural look matters. It comes as sheets for bag and home makers to cut, not as a finished bag. Send us your design drawing, the products the fabric is cut for and the thickness, and we will confirm the best foam grade and thickness for casual bags, covers and home goods.
We make cotton fabric in our own factory in China, where we have made neoprene products for 15 years. We foam the rubber, split the sheet to thickness and laminate the cotton face under one roof, so a change to the thickness or the face can be checked on a sample before bulk production starts.
A cotton face has to feel natural, so the lamination matters more than the colour. We laminate the cotton face to the foam under heat and pressure, so the face does not peel at the cut edge, and the foam is split to the thickness you ask for, so every sheet in the order cuts the same. The cotton face feels soft on the hand, so a casual bag looks like cloth and still cushions what is inside.
The fabric is commonly supplied as flat sheets, because a flat sheet cuts cleanly on a maker's table and wastes less than a roll that curls at the edges. The foam grade can be SBR for everyday lines, SCR for more stretch or CR for outdoor use, and the whole sheet wipes clean after cutting. We check the finished fabric by cutting a bag panel from it and stitching it, because a face that frays at the seam is a face that ends up in the offcut bin.
3 mm is the standard for most cotton fabric. It gives a good balance of a natural hand, comfort and a face that still sews cleanly. For the full range, see our neoprene sheet thickness guide.
| 2 mm | Light casual bags, covers and home goods where a soft hand matters most | Least padding; not enough for a product that must also cushion |
|---|---|---|
| 3 mm | Most cotton fabric; casual bags, covers and home goods | Best balance of a natural hand, comfort and an easy sew |
| 5 mm | Heavy home goods, work bags and covers that take a beating | Most padding, but heavier and slower to dry |
Measure the product, not the fabric name. Measure the largest panel the fabric must cover and the thickness the finished product needs, and tell us whether the product is sewn or glued: fabric ordered by name alone often fits the panel and leaves no room for the seam, or covers the seam and pulls short at the edge. See our custom cotton fabric — made to your thickness and size for the styles this thickness choice applies to. For a neoprene denim fabric face rather than a cotton fabric face, see our neoprene denim fabric.
SBR is the standard foam under a cotton face, and CR is the choice where the finished product will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a casual bag, cover or home product used indoors or on land. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a bag or cover sold for garden use, patios and outdoor living in the sun.
Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it moves with the product without a fight; SBR is firmer and holds a bag's shape when it is hung up to dry.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday casual bags, covers and home goods | Garden, patio and premium casual bags and covers |
If the face needs a denim look rather than a plain cotton hand, the product changes: our neoprene denim fabric carry a casual denim look for bags and jackets, and a cotton face and a denim face are ordered from different sheets.
Bag makers — cotton-faced sheets in your colours, cut to your panel sizes, for casual bags that feel like cloth.
Home brands — fabric printed with your logo for the home goods you sell, made to fit your range exactly.
Casual fashion makers — a natural face for bags and covers, made to your thickness, for products where a cloth look matters.
Gift companies — cotton-faced sheets for branded home goods, so your client's name looks at home in any room.
When neoprene is NOT the right choice
Tell us which of these your cotton fabric needs.
Will the cotton face peel at the cut edge?
No, not if the lamination is right. We laminate the cotton face to the foam under heat and pressure, so the face does not peel at the cut edge — tell us the product and we check the lamination on the sample.
Does the cotton face feel like cloth?
Yes. The cotton face feels soft and natural on the hand, so a casual bag looks like cloth and still cushions what is inside — tell us the product and we check the hand feel on the sample.
What is the minimum order?
20 sheets per order as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and the thickness you need and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the thickness and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We supply cotton fabric to your thickness, your print and your size, and we check the the hand feel on a sample on a sample before bulk production. The general minimum order is 20 sheets per order as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom cotton fabric and we will confirm the best foam grade and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A cotton face is judged on the hand, not on a roll. Send us the product size and we will make you a sample sheet to cut.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.