A neoprene cooler backpack is a soft insulated backpack made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that carries cold drinks on the back to a beach, a hike or a picnic. Outdoor shops, drinks brands and gift companies order it for cold drinks and outdoor trips, because it leaves both hands free and folds flat when empty. It is not a hard cooler box, so it does not keep drinks cold all day the way a rigid box with thick walls does. Send us your design drawing, the bag size and the lining you need, and we will confirm the best material and thickness for cold drinks and outdoor trips.
We manufacture custom neoprene cooler backpacks in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished cooler backpack under one roof, so a change to the bag size or the lining can be checked on a sample before bulk production starts.
A cooler backpack is judged by the straps, so the fit on the back matters more than the print. We cut the pack to your size with padded shoulder straps stitched through the foam and bar-tacked at the fixing points, because a strap that pulls away with a full pack is the first thing a customer notices, and the lining is wipe-clean where you ask for it, so a spilt drink wipes out instead of soaking into the foam. The base is cut wide and flat so the pack stands on the ground instead of tipping over.
5 mm is the standard for most cooler backpacks. It gives a good balance of padding, a firm shape and a pack that still sits well on the back, which is why most of the cooler backpacks we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.
| 3 mm | Light cooler backpacks for a short walk and for small drink loads | Least padding; not enough for a full day out |
|---|---|---|
| 5 mm | Most cooler backpacks; beach days, hikes and picnics | Best balance of padding, a firm shape and a comfortable fit |
| 7 mm | Large cooler backpacks and packs that travel in a car boot | Most padding, but heavier to carry on the back |
Measure the load, not the pack. Tell us what will go inside — the number of cans, the food boxes and the ice pack size — and we cut the pack to that load: a pack ordered by length alone often comes out too narrow for the boxes, or too tall to close over the cans. Send the size of the largest item too, so the opening is cut wide enough to load it. See our custom cooler backpacks — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a plain backpack without an insulated lining rather than a cooler backpack, our neoprene backpacks are the closer page.
SBR is the standard choice for most cooler backpacks, and CR is the choice where the pack will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a pack used at a picnic or a party. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a pack sold with beach gear or left in the sun.
The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the lining without a fight; SBR is firmer and holds the pack upright and square on the ground. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday cooler backpacks for picnics and parties | Beach, outdoor and premium cooler backpacks |
If the trip needs a hand-carried cooler rather than a backpack, the shape changes: Our neoprene cooler bags are cut from the same laminated neoprene, and the two are ordered from different patterns.
Outdoor shops — cooler backpacks in your colours for beach days and hikes, made to the load your customers actually carry.
Drinks brands — a pack printed with your logo that travels with the drinks you sell, made to fit your cans and bottles.
Gift companies — a branded cooler backpack as a corporate gift or a promotional item, for summer events and welcome packs.
Festival organisers — packs for festival-goers who need both hands free, in your colours, that guests keep after the event.
When neoprene is NOT the right choice
Tell us which of these your cooler backpack needs, and we will build the sample to your drawing.
Will the straps stay comfortable with a full load?
Yes, if they are placed right. The shoulder straps are padded and stitched through the foam, and a chest strap can be added where you ask for it, so the weight sits on the shoulders — tell us the load and we will fit the straps to it.
Can the cooler backpack fold flat when empty?
Yes. The foam folds flat when the pack is empty, so it packs flat for shipping and for storage at home — a 5 mm pack folds more easily than a 7 mm pack, so tell us how flat it must pack.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the bag size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom cooler backpacks to your drawing, your size and your print, and we check the straps and the lining on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom cooler backpacks and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A cooler backpack is judged by cold drinks at the end of a walk. Send us the load size and we will make you a sample to try with real cans and bottles.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.