A neoprene car headrest cover is a soft cover of laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that slips over a car headrest only, protecting it from wear, sweat and stains and coming off for washing. Car accessory brands, car dealers and gift companies order it for cars. It covers the headrest only, not the whole seat. Send us your design drawing and headrest size, and we will confirm the best material and thickness.
We manufacture custom neoprene car headrest covers in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished car headrest covers under one roof, so a change to the size or the print can be checked on a sample before bulk production starts.
A headrest cover is judged by its fit: a cover that is too loose slides around when the driver leans back, and a cover that is too tight will not go on at all, so we cut the cover to the headrest size with an elastic edge that grips the headrest shape, and we check the finished cover by slipping it on and off a real headrest several times, because a cover that is easy on the first day and loose after a month is a cover the driver will take off.
The cover sits where the head rests, so the foam and the face have to be comfortable and easy to clean. We use a fabric face that takes a printed logo cleanly and feels soft against the hair, and the foam inside cushions the headrest and protects it from sweat and hair products, and the whole cover comes off for washing and slips back on afterwards.
The cover has to fit many different cars, so the size is cut to the headrest you name. We cut the cover to the headrest measurements you send — the width, the height and the depth — because a cover ordered by car model alone often ends up too small for a wide headrest or too loose on a narrow one, and a cover that does not fit is a cover that is not used.
3 mm is the standard for most neoprene car headrest covers. It is thick enough to protect the headrest and cushion the head, and thin enough to slip on and off easily, which is why most of the headrest covers we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.
| Thickness | Best for | Trade-off |
|---|---|---|
| 3 mm | Most headrest covers for cars; easy to fit and remove for washing | Best balance of protection, comfort and a neat fit |
| 5 mm | Headrest covers for heavy daily use and extra cushioning | More cushioning, but harder to slip on and off |
| 7 mm | Thick headrest covers for maximum comfort on long drives | Most cushioning, but bulky on a small headrest |
Measure the headrest, not the car. Take the width, height and depth of the headrest the cover must fit, because headrest sizes differ between car models, and tell us whether the headrest has posts or a fixed mount, so the cover is cut to the real headrest instead of a guess. See our custom neoprene car headrest covers — elastic fit, for headrests only, 3–8 mm for the styles this thickness choice applies to. For a cover that wraps the whole seat rather than the headrest only, our neoprene car seat covers are the closer page.
SBR is the standard choice for most car headrest covers, and CR is the choice where the cover will sit in strong sun. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a cover used inside a car. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a cover that will sit in a parked car in strong sun, day after day.
The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps a headrest without a fight; SBR is firmer and holds a neat cover shape through repeated fitting and washing. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor use and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Car interior and dealer headrest covers | Sun-exposed and premium headrest covers |
For the steering wheel from the same car interior range, our neoprene steering wheel covers are the closer page.
Car accessory brands — your own logo on a headrest cover your customers use on every drive, made to your headrest size.
Car dealers — matching headrest covers for a whole showroom or a fleet, with the dealer name printed on the face, so every car looks like one fleet.
Gift companies — a headrest cover as a corporate gift or a car gift set, in your colours, for new car buyers and company fleets.
Retailers and auto shops — a headrest cover sold on its own or with a seat cover, sized to your headrest, for drivers who want their headrests protected.
When neoprene is NOT the right choice
Tell us which of these your car headrest covers need, and we will build the sample to your drawing.
Will the cover fit my car's headrests?
Yes, if you send the headrest measurements. We make the cover to your headrest width, height and depth, so it grips without being hard to slip on — measure the headrest itself, not the car model.
Can I take the cover off to wash it?
Yes. The cover slips off the headrest, wipes clean or rinses, and slips back on afterwards, so a stain does not mean a new cover.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and the headrest width, height and depth and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the headrest size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom neoprene car headrest covers to your headrest size, your print and your fit, and we check the fit and the elastic edge on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom neoprene car headrest covers and we will confirm the best material and thickness for your car headrest covers.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A headrest cover is judged by whether it stays on the headrest and comes off for washing. Send us the headrest size and we will make you a sample to try on a real car seat.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.