NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Fabric

  • Custom Neoprene Twill Fabric
  • Custom Neoprene Twill Fabric
Custom Neoprene Twill FabricCustom Neoprene Twill Fabric

Custom Neoprene Twill Fabric

  • Material: Laminated neoprene (SBR / SCR / CR foam + twill fabric)
  • Thickness: 1.5-45mm
  • LOGO/COLOR Options: Customized
  • Application: Work bags and outdoor goods
  • Product description: Custom neoprene twill fabric made in our own factory in China, laminated in your colours, made to order.
  • INQUIRY

Custom Neoprene Twill Fabric

We laminate twill fabric onto neoprene foam in our own factory in China, where we have made neoprene products for 15 years, giving a diagonal-weave look with the soft cushion of neoprene underneath, for work bags and outdoor goods. Send us your design drawing, foam type and thickness, and we will confirm the best foam and fabric for your product.

 

Material
Laminated neoprene (SBR / SCR / CR foam + twill fabric)
Thickness
Customized to your thickness, 1.5–45 mm
Minimum order
20 sheets as a general minimum, adjustable
Lead time
15–18 days after order confirmation

 

Twill is a weave with diagonal lines — the yarns run at an angle, so the face shows fine diagonal ridges instead of a flat grid. It is not the same as canvas: canvas is a flat plain weave, while twill has a diagonal texture that is easy to spot and hard to mistake for anything else.

We laminate the twill fabric onto SBR, SCR or CR foam, on one side or both, and the foam gives the sheet its body. A twill face with plain nylon on the other side is the usual order, and twill on both sides is available too. The sheet must show the foam and the lamination in the photo — a close-up of the diagonal lines alone does not show that it is neoprene.

Work bags and outdoor goods are the natural home for this fabric. It suits work bags, outdoor gear and goods that must take hard use, and it holds its shape better than a plain fabric face. Our custom neoprene oxford fabric is the closest alternative in our range — a basket weave rather than a diagonal weave — and we will help you pick between the two if you are unsure.

Foam choice matters under a twill face. CR foam is the firmest of our three foams, with hardness 3–5°, density 276.32 kg/m³, tensile 860 kPa and elongation 550% (TDS v21); SBR 10–15° is softer and lighter, with density 158.34 kg/m³, tensile 256 kPa and elongation 185% (TDS v21). If you are unsure how thickness changes the feel of a sheet, our neoprene sheet thickness guide explains it step by step.

 

Which Thickness Should You Choose?

The thickness here is the foam thickness under the twill face. The fabric is the same; the foam is what changes the feel of the finished product.

Thin foam — light work bags. A thin foam under the twill face keeps the sheet light and easy to sew, for light work bags that should drape and fold.

Medium foam — the most popular choice. Our most ordered thickness for twill-faced sheets, with real body and cushioning for work bags that hold their shape.

Thick foam — firm work bags and outdoor gear. A thick foam under the twill face gives the most structure and warmth, for firm work bags and outdoor gear that stand up on their own.

Tell us the product and how it will be used, and we will recommend the foam thickness — from 1.5 mm to 45 mm, to your specification. Our custom neoprene oxford fabric is the basket weave in the same laminated range.

 

Specifications

ItemSpecification
MaterialLaminated neoprene (SBR / SCR / CR foam + twill fabric)
ThicknessCustomized to your thickness, 1.5–45 mm
Fabric FaceTwill, twill weave, diagonal lines
LaminationSingle or double-sided
Sheet Size51″ × 130″
Foam OptionsSBR, SCR or CR foam
ColourBlack and khaki as standard; other twill colours on request
PackagingFlat-packed sheets, in cartons
ApplicationWork bags and outdoor goods

CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports; our CR figures are hardness 3–5°, density 276.32 kg/m³, tensile 860 kPa and elongation 550% (TDS v21). SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags and casual wear; our SBR 10–15° figures are density 158.34 kg/m³, tensile 256 kPa and elongation 185% (TDS v21). SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.

 

Who Orders Neoprene Twill Fabric From Us?

Bag makers — twill-faced sheets for work bags, totes and backpacks, cut to your patterns and your colours.Outdoor brands — a diagonal weave with a neoprene body, for outdoor gear that must take hard use.
Workwear sellers — a fabric that holds up to daily wear, for ranges that mix diagonal weaves with softer, more casual materials.Fabric distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market.

 

Customisation Options

  • Foam: SBR, SCR or CR foam under the twill face, to your product.
  • Thickness: foam thickness from 1.5 mm to 45 mm, to your specification.
  • Sheet size: standard 51″ × 130″, or cut to your size on request.
  • Lamination: twill on one side with plain nylon on the other, or twill on both sides.
  • Colour: Black and khaki as standard; other twill colours on request.
  • Packaging: flat-packed sheets, in cartons, with your labels on request.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. Fabric type and required sheet size
  3. Required foam thickness (from 1.5 mm to 45 mm)
  4. Foam type, if known (SBR, SCR or CR)
  5. Colour requirements
  6. Estimated order quantity and destination country

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

 

Frequently Asked Questions

Is twill different from canvas?
Yes. Canvas is a flat plain weave with no direction; twill has diagonal lines running across the face. The two look different up close, and twill is the more textured of the two.

What foam types can be used under the twill fabric?
SBR, SCR or CR foam. Tell us the product and we will help you pick the foam for it.

What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling. Send us your design drawing and fabric details and we will confirm the sample details.

How long does bulk production take?
Usually 15–18 days after order confirmation, depending on the quantity and customisation.

How do I order?
Send your design drawing, the fabric type and colour, foam type, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.