We laminate striped fabric onto neoprene foam in our own factory in China, where we have made neoprene products for 15 years, giving a clean striped look with the soft cushion of neoprene underneath, for striped bags and fashion goods. Send us your design drawing, foam type and thickness, and we will confirm the best foam and fabric for your product.
| Material Laminated neoprene (SBR / SCR / CR foam + striped fabric) | Thickness Customized to your thickness, 1.5–45 mm | Minimum order 20 sheets as a general minimum, adjustable | Lead time 15–18 days after order confirmation |
Striped fabric is a pattern of straight lines — bands of colour running in one direction, wide or narrow, across the whole face. It is not the same as plaid: plaid crosses lines in two directions to make squares, while stripes run in one direction only, and the two look completely different on a bag.
We laminate the striped fabric onto SBR, SCR or CR foam, on one side or both, and the foam gives the sheet its body. A striped face with plain nylon on the other side is the usual order, and striped fabric on both sides is available too. The sheet must show the foam and the lamination in the photo — a close-up of the stripes alone does not show that it is neoprene.
Striped bags and fashion goods are the natural home for this fabric. It suits tote bags, backpacks and fashion pieces with a clean, striped look, and it holds its shape better than a plain fabric face. Our custom neoprene polka dot fabric is the closest alternative in our range — round dots rather than straight lines — and we will help you pick between the two if you are unsure.
Foam choice matters under a striped face. CR foam is the firmest of our three foams, with hardness 3–5°, density 276.32 kg/m³, tensile 860 kPa and elongation 550% (TDS v21); SBR 10–15° is softer and lighter, with density 158.34 kg/m³, tensile 256 kPa and elongation 185% (TDS v21). If you are unsure how thickness changes the feel of a sheet, our neoprene sheet thickness guide explains it step by step.
The thickness here is the foam thickness under the striped face. The fabric is the same; the foam is what changes the feel of the finished product.
Thin foam — light striped bags. A thin foam under the striped face keeps the sheet light and easy to sew, for light striped bags that should drape and fold.
Medium foam — the most popular choice. Our most ordered thickness for striped-faced sheets, with real body and cushioning for striped bags that hold their shape.
Thick foam — structured striped bags and jackets. A thick foam under the striped face gives the most structure and warmth, for structured striped bags and jackets that stand up on their own.
Tell us the product and how it will be used, and we will recommend the foam thickness — from 1.5 mm to 45 mm, to your specification. Our custom neoprene polka dot fabric is the round-dot pattern in the same printed range.
| Item | Specification |
|---|---|
| Material | Laminated neoprene (SBR / SCR / CR foam + striped fabric) |
| Thickness | Customized to your thickness, 1.5–45 mm |
| Fabric Face | Striped, striped pattern, straight lines |
| Lamination | Single or double-sided |
| Sheet Size | 51″ × 130″ |
| Foam Options | SBR, SCR or CR foam |
| Colour | Navy and white stripes as standard; other striped colours on request |
| Packaging | Flat-packed sheets, in cartons |
| Application | Striped bags and fashion goods |
CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports; our CR figures are hardness 3–5°, density 276.32 kg/m³, tensile 860 kPa and elongation 550% (TDS v21). SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags and casual wear; our SBR 10–15° figures are density 158.34 kg/m³, tensile 256 kPa and elongation 185% (TDS v21). SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.
| Bag makers — striped-faced sheets for striped bags, totes and backpacks, cut to your patterns and your colours. | Fashion brands — a clean striped look with a neoprene body, for bags and fashion pieces that should look fresh and simple. |
| Fashion sellers — a fabric that stands out on a shelf, for ranges that mix striped patterns with softer, more casual materials. | Fabric distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market. |
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
Is striped fabric different from plaid?
Yes. Stripes run in one direction only; plaid crosses lines in two directions to make squares. The two are both line patterns, but the look is completely different.
What foam types can be used under the striped fabric?
SBR, SCR or CR foam. Tell us the product and we will help you pick the foam for it.
What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling. Send us your design drawing and fabric details and we will confirm the sample details.
How long does bulk production take?
Usually 15–18 days after order confirmation, depending on the quantity and customisation.
How do I order?
Send your design drawing, the fabric type and colour, foam type, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.