NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

SBR Neoprene Foam Sheet

  • Custom Neoprene Adhesive-Backed SBR Foam Sheets
  • Custom Neoprene Adhesive-Backed SBR Foam Sheets
  • Custom Neoprene Adhesive-Backed SBR Foam Sheets
Custom Neoprene Adhesive-Backed SBR Foam SheetsCustom Neoprene Adhesive-Backed SBR Foam SheetsCustom Neoprene Adhesive-Backed SBR Foam Sheets

Custom Neoprene Adhesive-Backed SBR Foam Sheets

  • Material: SBR neoprene foam + adhesive back
  • Thickness: 1.5–45 mm
  • LOGO/COLOR Options: Customized
  • Application: Stick-on pads, linings, gaskets for consumer products
  • Product description: Custom neoprene adhesive-backed SBR foam sheets made in our own factory in China, cut to your thickness and size.
  • INQUIRY

Custom Neoprene Adhesive-Backed SBR Foam Sheets

We foam SBR neoprene in our own factory in China, where we have made neoprene products for 15 years, and add a peel-and-stick adhesive back — tear off the liner and press the sheet in place, no glue, no waiting, for stick-on pads, linings and cushioning on consumer products. Send us your design drawing or specification, thickness and sheet size, and we will confirm the best foam grade for your product.

 

Material
SBR neoprene foam + adhesive back
Thickness
1.5–45 mm
Minimum order
20 sheets as a general minimum, adjustable
Lead time
15–18 days after order confirmation

 

An adhesive-backed sheet is a foam sheet that installs itself. The adhesive is already on the back, protected by a liner, so the buyer peels the liner and presses the sheet onto a clean, dry surface. It suits makers who sell a pad or a lining as a finished part, not makers who want to glue foam themselves.

We foam the SBR rubber, split the bun to your thickness, and apply the adhesive back with its liner before the sheet leaves the line. The sheet can be supplied plain, or laminated with nylon, T-fabric, polyester or lycra on the front face, in your colours — the adhesive stays on the back, the fabric stays on the front.

SBR is the soft, light foam in our range, and this sheet uses the SBR 10–15° grade: hardness 10–15° Shore C, density 158.34 kg/m³, tensile strength 256 kPa and elongation 185% (TDS v21). Those are measured figures from our own foaming line, and they are the figures in the table below. This is an SBR sheet — the adhesive-backed CR sheet is a different product, in a different foam, and we will help you pick between them if you are unsure.

Stick-on uses are the home of this sheet: pads inside cases and boxes, linings on shelves and drawers, cushioning under equipment, and gaskets on consumer products. For a smooth, non-adhesive SBR face, see our custom neoprene smooth skin SBR foam sheets. If you are unsure how thickness changes the feel of a sheet, our neoprene sheet thickness guide explains it step by step.

 

Which Thickness Should You Choose?

The thickness here is the foam thickness under the adhesive. The adhesive is the same; the foam is what changes the cushioning of the finished pad.

Thin foam — light linings and slim pads. A thin foam under the adhesive keeps the pad slim and easy to cut, for linings and pads that should sit flat.

Medium foam — the most popular choice. Our most ordered thickness for adhesive-backed SBR sheets, with real cushioning for pads and linings that take daily use.

Thick foam — soft cushioning and thick pads. A thick foam under the adhesive gives the most cushioning, for pads that protect what sits on them.

Tell us the product and the surface the sheet will stick to, and we will recommend the foam thickness — from 1.5 mm to 45 mm, to your specification.

 

Specifications

ItemSpecification
MaterialSBR neoprene foam + adhesive back
Thickness1.5–45 mm
Sheet Size51″ × 130″
Hardness10–15° Shore C
Density158.34 kg/m³
Tensile Strength256 kPa
Elongation185%
Adhesive BackSelf-adhesive back with peel-off liner
ApplicationStick-on pads, linings, gaskets for consumer products

CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports. SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags, sleeves and pads; our SBR 10–15° figures are density 158.34 kg/m³, tensile 256 kPa and elongation 185% (TDS v21). SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.

 

Who Orders Adhesive-Backed SBR Foam Sheets From Us?

Consumer product makers — adhesive-backed SBR sheets for stick-on pads and linings, cut to your specification and your colours.Case and box makers — self-adhesive foam for pads inside cases, boxes and drawers, cut to your patterns.
Homeware brands — stick-on cushioning for shelves, furniture and home products, in your sizes and colours.Foam distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market.

 

Customisation Options

  • Foam grade: SBR 10–15° foam to the figures in the table, from our own foaming line.
  • Adhesive: self-adhesive back with peel-off liner as standard.
  • Thickness: foam thickness from 1.5 mm to 45 mm, to your specification.
  • Sheet size: standard 51″ × 130″, or cut to your size on request.
  • Lamination: nylon, T-fabric, polyester or lycra on the front face, in your colours.
  • Packaging: flat-packed sheets, in cartons, with your labels on request.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. Foam grade and required sheet size
  3. Required thickness (from 1.5 mm to 45 mm)
  4. Surface the sheet will stick to, if known
  5. Colour and lamination requirements
  6. Estimated order quantity and destination country

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

 

Frequently Asked Questions

How do I stick the sheet in place?
Peel off the liner and press the sheet onto a clean, dry surface. No glue is needed, and the sheet holds as soon as it is pressed down.

Is this SBR foam or CR foam?
SBR foam, 10–15° grade — hardness 10–15°, density 158.34 kg/m³, tensile 256 kPa, elongation 185% (TDS v21). Our adhesive-backed CR sheet is a different product, in CR foam.

Can the front face be laminated with fabric?
Yes. We laminate nylon, T-fabric, polyester or lycra on the front face, in your colours, while the adhesive stays on the back.

What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling. Send us your specification and the surface it will stick to and we will confirm the sample details.

How do I order?
Send your design drawing, the foam grade, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.