NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

SCR Neoprene Foam Sheet

  • Custom Neoprene 2mm SCR Foam Sheets
  • Custom Neoprene 2mm SCR Foam Sheets
Custom Neoprene 2mm SCR Foam SheetsCustom Neoprene 2mm SCR Foam Sheets

Custom Neoprene 2mm SCR Foam Sheets

  • Material: SCR neoprene foam
  • Thickness: 2mm
  • LOGO/COLOR Options: Customized
  • Application: Light sports supports and flexible products
  • Product description: Custom neoprene 2mm scr foam sheets made in our own factory in China, cut to your thickness and size.
  • INQUIRY

Custom Neoprene 2mm SCR Foam Sheets

We foam SCR neoprene in our own factory in China, where we have made neoprene products for 15 years, and split it to 2 mm — the thinnest SCR split we make, for light supports and flexible products, for sports brands, support makers and consumer goods brands. Send us your design drawing or specification, thickness and sheet size, and we will confirm the best foam grade for your product.

 

Material
SCR neoprene foam
Thickness
2 mm
Minimum order
20 sheets as a general minimum, adjustable
Lead time
15–18 days after order confirmation

 

A 2 mm SCR sheet is about flexibility. It is the thinnest SCR split we make, and it keeps a light support, a flexible sleeve or a thin protective product soft and easy to move in, without the stiffness of a thicker sheet. A product that should bend with the body starts with a thin sheet.

We foam the SCR rubber, split the bun to 2 mm, and check the thickness across the sheet before it leaves the line. The sheet can be supplied plain, or laminated with nylon, T-fabric, polyester or lycra, on one side or both, in your colours. Our neoprene SCR foam sheets page shows the support and fitness uses in more detail.

Light supports and flexible products are the home of this sheet. It suits light braces, flexible sleeves and thin sports products that should move with the wearer — the products people wear for hours and barely notice. If your product needs more support or padding, a thicker SCR split from the same foam is the right choice, and we will tell you so before you order.

Thickness is only half the story. The measured figures matter too: this SCR foam is the SCR 30% column — hardness 3–8° Shore C and density 172–186 kg/m³ (TDS v21). Those figures are from our own foaming line, and they are the figures in the table below. If you are unsure how thickness changes the feel of a sheet, our neoprene sheet thickness guide explains it step by step.

 

Which Thickness Should You Choose?

This product is split to 2 mm. The question is whether 2 mm is right for your product, or whether a thicker sheet would serve it better.

2 mm — light supports and flexible products, the thinnest SCR split. The lightest SCR sheet we make, for products that should bend with the body.

3 mm — the standard SCR thickness. Our most used SCR split, for supports, fitness gear and protective products — see our custom neoprene 3mm SCR foam sheets.

5–10 mm — thicker supports and protective products. For products that need more support than a thin sheet gives, up to 45 mm on request from the same SCR foam.

Tell us the product and how it will be used, and we will recommend the thickness — this 2 mm sheet, or a thicker split from the same SCR foam.

 

Specifications

ItemSpecification
MaterialSCR neoprene foam
Thickness2 mm
Sheet Size51″ × 130″
Hardness3–8° Shore C
Density172–186 kg/m³
Foam GradeSCR 30% column (TDS v21)
LaminationNylon, T-fabric, polyester or lycra, single or double-sided
ColourBlack as standard; custom colours on request
ApplicationLight sports supports and flexible products

The figures in the table come from the SCR 30% column of TDS v21 — hardness 3–8° Shore C, density 172–186 kg/m³. CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports. SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags, sleeves and pads. SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.

 

Who Orders 2mm SCR Foam Sheets From Us?

Sports brands — 2 mm SCR sheets for light supports and flexible products, cut and laminated to your specification and your colours.Support makers — 2 mm foam for light braces and sleeves, made to your tech pack and your size range.
Consumer goods brands — 2 mm SCR foam for thin everyday products that should bend with the body.Foam distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market.

 

Customisation Options

  • Foam grade: SCR foam to the figures in the table, from our own foaming line.
  • Thickness: 2 mm for this product; other thicknesses from 1.5 mm to 45 mm on request.
  • Sheet size: standard 51″ × 130″, or cut to your size on request.
  • Lamination: nylon, T-fabric, polyester or lycra, on one side or both, in your colours.
  • Colour: black as standard; custom colours on request.
  • Packaging: flat-packed sheets, in cartons, with your labels on request.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. Foam grade and required sheet size
  3. Required thickness (2 mm, or a thicker split)
  4. Lamination requirements (nylon, T-fabric, polyester or lycra)
  5. Colour requirements
  6. Estimated order quantity and destination country

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

 

Frequently Asked Questions

Is 2mm SCR too thin for a support?
No — 2 mm is the right thickness for a light support or a flexible sleeve that should bend with the body. If your support needs to hold its shape, tell us and we will suggest a thicker SCR split.

Can 2mm SCR sheets be laminated with fabric?
Yes. We laminate nylon, T-fabric, polyester or lycra onto the foam, on one side or both, in your colours.

What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling. Send us your specification and we will confirm the sample details.

How long does bulk production take?
Usually 15–18 days after order confirmation, depending on the quantity and customisation.

How do I order?
Send your design drawing, the foam grade, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.