A neoprene triathlon wetsuit is a light racing suit made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that a triathlete wears for the open-water swim to move fast and stay warm. Triathlon brands, swim shops and race organisers order it for triathlon swimming races, because it is lighter and lower-drag than a dive wetsuit and comes off fast at transition. It is not a dive wetsuit, so it is not cut for the same thick warmth and the same deep-water use as a scuba suit. Send us your design drawing, the swimmer sizes and the suit style, and we will confirm the best material and thickness for triathlon swimming races.
We manufacture custom neoprene triathlon wetsuits in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished triathlon wetsuit under one roof, so a change to the fit or the panels can be checked on a sample before bulk production starts.
A triathlon wetsuit is judged by the shoulders, so the panels matter more than the print. We cut the suit to the swimmer size with smooth-skin chest panels and flexible shoulder panels, so the arms move freely on every stroke, and the zip is placed at the back where it opens fast at transition. The suit is checked on a swimmer, because a suit that binds at the shoulders is a suit that slows the race.
5 mm is the standard for most triathlon wetsuits. It gives a good balance of speed, flexibility and a suit that still keeps the swimmer warm, which is why most of the triathlon wetsuits we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.
| 3 mm | Light triathlon wetsuits for warm water and for fast swims | Least warmth; not enough for a cold open-water swim |
|---|---|---|
| 5 mm | Most triathlon wetsuits; open-water races and training | Best balance of speed, flexibility and warmth |
| 7 mm | Cold-water triathlons and swimmers who feel the cold | Warmest, but heavier and slower to take off |
Measure the swimmer, not the clothing size. Measure the chest, the waist and the height, and send all three with your enquiry: a suit ordered by clothing size alone often fits the chest and pulls short at the arms, or fits the arms and gaps at the waist. Tell us whether the suit is for racing or training, because each use needs a different fit. See our custom triathlon wetsuits — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a thick suit for scuba diving rather than a light suit for racing, our neoprene diving wetsuits are the closer page.
SBR is the standard choice for most triathlon wetsuits where cost matters, and CR is the choice where the suit will be raced in open water. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a suit used in training. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a suit sold for open-water races or used in salt water every week.
The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it stretches further at the shoulders without a fight; SBR is firmer and holds the suit snug and smooth on the swimmer. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Training triathlon wetsuits and club suits | Open-water racing and premium triathlon wetsuits |
If the swimmer needs a full dive suit rather than a racing suit, the shape changes: Our neoprene kids wetsuits are cut from the same laminated neoprene, and the two are ordered from different patterns.
Triathlon brands — a racing suit printed with your logo that athletes trust on race day, made to your size chart.
Swim shops — triathlon wetsuits in your sizes for open-water swimmers, made to the sizes your customers actually wear.
Race organisers — suits for your race series, so every athlete wears your name on the start line.
Triathlon clubs — suits in club colours for members, so the club name is seen on every swim.
When neoprene is NOT the right choice
Tell us which of these your triathlon wetsuit needs, and we will build the sample to your drawing.
Will the suit slow my shoulders on a long swim?
Not if the panels are cut right. The shoulder panels are cut for flexibility, so the arms move freely on every stroke — send the chest and arm measurements and we will cut the panels to the swimmer.
Can I take the suit off fast at transition?
Yes. The back zip opens fast, and the suit is cut to slide off the shoulders and legs without sticking — tell us the race use and we will confirm the zip and the fit for a fast transition.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the swimmer sizes and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom triathlon wetsuits to your drawing, your size and your print, and we check the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom triathlon wetsuits and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A triathlon wetsuit is judged by a fast swim and a fast transition. Send us the swimmer sizes and we will make you a sample to try in open water.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.