NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Fitness Equipment

  • Neoprene Sweat Shorts
  • Neoprene Sweat Shorts
  • Neoprene Sweat Shorts
Neoprene Sweat ShortsNeoprene Sweat ShortsNeoprene Sweat Shorts

Neoprene Sweat Shorts

Neoprene sweat shorts are short trousers made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that trap body heat around the waist, hips and thighs to make the wearer sweat during training. Fitness brands and gym suppliers order them for sweat workouts, weight cutting and warm-up sessions where only the lower body needs the heat. They are not a full sauna suit, so they do not cover the chest, arms or back. Send us your design drawing, the waist and hip sizes and the shorts length, and we will confirm the best material and thickness for sweat workouts and training.

We manufacture custom sweat shorts in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished sweat shorts under one roof, so a change can be checked on a sample before bulk production starts.

Sweat shorts have to stay up when the wearer runs, so the waistband matters more than the heat alone. We cut the shorts to the waist and hip measurement with an elastic waistband, so they sit close without squeezing the stomach, and the leg openings are finished with a bound hem so they do not ride up when the wearer squats. The crotch is shaped to follow the body so the shorts do not pull when the wearer lunges.

The shorts are commonly made with a drawstring waist where you ask for it, stitched through the foam and bar-tacked at the fixing points, because a waistband that slips during a run is the first thing a wearer notices. A pocket can be added where you ask for it, so a phone or a key travels with the wearer, and the whole shorts wipe clean after a session and are left to dry. We check the finished shorts by running and squatting in them, because shorts that ride up are shorts that end up in the drawer.

 

What thickness of neoprene is best for a sweat shorts?

3 mm is the standard for most sweat shorts. It gives a good balance of sweat, stretch and shorts that still let the wearer run. For the full range, see our neoprene sheet thickness guide.

2 mmLight shorts for short sessions and for wearers who want the thinnest feelLeast sweat effect; not enough for a full sweat session
3 mmMost sweat shorts; sweat workouts and trainingBest balance of sweat, stretch and freedom to run
5 mmHeavy sessions and wearers who want the strongest sweat effectStrongest effect, but hotter and stiffer over a long session

Measure the waist and hips, not the trouser size. Measure around the waist at the navel and around the hips at the widest point, and the length from the waist to the hem, and send all three with your enquiry: shorts ordered by trouser size alone often fit the waist and pull tight at the thigh, or fit the thigh and gap at the waist. See our custom sweat shorts — made to your design, 3–8 mm for the styles this thickness choice applies to. For a sauna suit rather than a sweat shorts, see our neoprene sauna suits.

 

SBR or CR neoprene — which is right for sweat shorts?

SBR is the standard choice for most sweat shorts, and CR is the choice where the shorts will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for shorts worn for indoor gym work or weight cutting. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for shorts sold for outdoor training and boot camps in the sun.

Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it moves with the legs without a fight; SBR is firmer and holds the shorts' shape when they are hung up to dry.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday sweat shorts for gyms and indoor trainingOutdoor, boot-camp and premium sweat shorts

If the whole body needs the sweat effect rather than the legs alone, the product changes: our neoprene sauna suits cover the full body for sweat workouts and weight cutting, and a pair of shorts and a full suit are ordered from different patterns.

 

Who is a neoprene sweat shorts for — and who is it not for?

Fitness brands — shorts in your colours and with your logo, made to your waist size range, for customers who train for a weigh-in.

Gym suppliers — shorts in your colours for the members in your gym, so training stays on plan and your gym name is seen in every class.

Weight-cutting coaches — shorts made to your athletes' sizes, with size marking that survives the kit bag, for fighters cutting weight before a bout.

Online fitness stores — shorts that photograph well, fold flat for shipping and fit a wide size range, for customers who buy sweat gear online.

When neoprene is NOT the right choice

  • If the wearer needs to swim — swim shorts, not sweat shorts, are the right product for the water.
  • If the wearer has a heart condition or is pregnant — sweat shorts raise body heat, and a clinician should be asked first.
  • If the shorts must be very light for a sprint — thin running shorts fit a speed brief better than neoprene sweat shorts.
  • If the lowest possible unit cost is the whole brief — thin plastic sweat shorts fit a one-season budget better than laminated neoprene shorts.

 

Customisation Options

Tell us which of these your sweat shorts needs.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Sizes: graded to your own size chart, from small to large, with an elastic waistband.
  • Pocket: a pocket for a phone or a key where you ask for one.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will the shorts stay up when I run?
Yes, if the waistband is cut to the waist. We cut the shorts to the waist and hip measurement with an elastic waistband, and a drawstring can be added where you ask for it — send the waist and hip sizes and we cut to them, not to a trouser size.

Can I add a pocket for my phone?
Yes. A pocket can be added where you ask for it, stitched through the foam so it takes the weight of a phone — tell us the pocket size and position in your drawing.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom sweat shorts to your drawing, your size and your print, and we check the the fit on a sample on a sample before bulk production. The general minimum order is 200 pieces per design as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom sweat shorts and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The waist and hip sizes you need, with your size chart
  3. The shorts length — above the knee or at the knee
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

Sweat shorts are judged after a full training session, not after five minutes. Send us the waist sizes and we will make you a sample to try on a real athlete.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.