NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Fitness Equipment

  • Neoprene Sauna Suits
  • Neoprene Sauna Suits
  • Neoprene Sauna Suits
Neoprene Sauna SuitsNeoprene Sauna SuitsNeoprene Sauna Suits

Neoprene Sauna Suits

A neoprene sauna suit is a full-body suit made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that traps body heat to make the wearer sweat during training. Fitness brands and boxing gyms order it for sweat workouts, weight cutting and warm-up sessions before a weigh-in. It is not a wetsuit, so it is not made for swimming or for staying warm in water. Send us your design drawing, the body sizes and the suit style, and we will confirm the best material and thickness for sweat workouts and weight cutting.

We manufacture custom sauna suits in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished sauna suit under one roof, so a change can be checked on a sample before bulk production starts.

A sauna suit has to move with the body, so the cut at the shoulders and knees matters more than the heat alone. We cut the suit to the body measurement with shaped arms and legs, so the wearer can shadow-box, run and stretch without the suit pulling at the shoulders, and the waist is cut to sit close without squeezing the stomach. The cuffs are finished with a bound hem so they do not ride up when the wearer trains.

The suit is commonly closed with a front zip, placed so its teeth never touch the skin when the suit is opened and closed, and the seams are placed at the sides where they do not rub during a run. The inside face is smooth, so the suit slides on over training clothes without catching, and the whole suit wipes clean after a session and is left to dry. We check the finished suit by training in it, because a suit that pulls at the shoulders is a suit that ends up hanging in the changing room.

 

What thickness of neoprene is best for a sauna suit?

3 mm is the standard for most sauna suits. It gives a good balance of sweat, stretch and a suit that still lets the wearer train. For the full range, see our neoprene sheet thickness guide.

2 mmLight suits for short sessions and for wearers who want the thinnest feelLeast sweat effect; not enough for a full sweat session
3 mmMost sauna suits; sweat workouts and weight cuttingBest balance of sweat, stretch and freedom to train
5 mmHeavy sessions and wearers who want the strongest sweat effectStrongest effect, but hotter and stiffer over a long session

Measure the body, not the tracksuit size. Measure the chest, waist, hips and the inside leg, and tell us whether the suit is worn over training clothes or on its own: a suit ordered by tracksuit size alone often fits the chest and pulls short at the ankle, or fits the legs and gaps at the waist. See our custom sauna suits — made to your design, 3–8 mm for the styles this thickness choice applies to. For a exercise mat rather than a sauna suit, see our neoprene exercise mats.

 

SBR or CR neoprene — which is right for sauna suits?

SBR is the standard choice for most sauna suits, and CR is the choice where the suit will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a suit worn for indoor gym work, boxing training or weight cutting. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a suit sold for outdoor training and boot camps in the sun.

Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it moves with the body without a fight; SBR is firmer and holds the suit's shape when it is hung up to dry.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday sauna suits for gyms and indoor trainingOutdoor, boot-camp and premium sauna suits

If only the legs need the sweat effect rather than the whole body, the product changes: our neoprene sweat shorts cover the legs alone for training and weight cutting, and a full suit and a pair of shorts are ordered from different patterns.

 

Who is a neoprene sauna suit for — and who is it not for?

Fitness brands — suits in your colours and with your logo, made to your body size range, for customers who train for a weigh-in.

Boxing gyms — suits in your colours for the boxers in your gym, so weight cutting stays on plan and your gym name is seen in every session.

Weight-cutting coaches — suits made to your athletes' sizes, with size marking that survives the kit bag, for fighters cutting weight before a bout.

Online fitness stores — a suit that photographs well, folds flat for shipping and fits a wide size range, for customers who buy sweat gear online.

When neoprene is NOT the right choice

  • If the wearer needs to swim — a wetsuit, not a sauna suit, is the right product for the water.
  • If the wearer has a heart condition or is pregnant — a sauna suit raises body heat, and a clinician should be asked first.
  • If the suit must be very light for a sprint — a thin training top fits a speed brief better than a full sauna suit.
  • If the lowest possible unit cost is the whole brief — a thin plastic sweat suit fits a one-season budget better than a laminated neoprene suit.

 

Customisation Options

Tell us which of these your sauna suit needs.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Sizes: graded to your own size chart, from small to large, with a front zip.
  • Hood: a hood where you ask for one, for extra heat on the head and neck.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Can the suit be worn over training clothes?
Yes. The inside face is smooth so the suit slides on over training clothes without catching, and the cuffs are finished so they do not ride up — tell us what is worn underneath and we cut the size to suit it.

Does the suit have a hood?
It can. A hood can be added where you ask for one, for extra heat on the head and neck, stitched through the foam so it stays in place — tell us in your drawing whether the hood is needed.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom sauna suits to your drawing, your size and your print, and we check the the fit on a sample on a sample before bulk production. The general minimum order is 200 pieces per design as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom sauna suits and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The body sizes you need, with your size chart
  3. The suit style — with or without a hood
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A sauna suit is judged after a full training session, not after five minutes. Send us the body sizes and we will make you a sample to try on a real athlete.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.