A neoprene pet carrier is a soft padded bag made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that carries a small pet to the vet, on a trip or on a plane. Pet brands and pet shops order it for cats and small dogs that travel in a carrier instead of on a lead. It is not a dog coat, so it carries the pet inside instead of covering it. Send us your design drawing, the pet size and the carrier style, and we will confirm the best material and thickness for pet travel and vet visits.
We manufacture custom pet carriers in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished pet carrier under one roof, so a change can be checked on a sample before bulk production starts.
A pet carrier has to hold its shape, so the base matters more than the top. We cut the carrier to the pet size with a firm padded base, so it does not sag when the pet moves inside, and the mesh windows are placed where the pet can see out and breathe without escaping. The opening is commonly a top zip or a side door to your drawing, and the zip is placed so its teeth never catch the pet's fur when the carrier is opened and closed.
The carrier is commonly made with breathable mesh windows, stitched through the foam and bar-tacked at the fixing points, because a window that tears on the first trip is the first thing a customer notices. A shoulder strap and carry handles are added where you ask for them, so the carrier travels by hand or over the shoulder, and the whole carrier wipes clean after a journey. We check the finished carrier by placing a pet inside and carrying it, because a carrier that sags is a carrier that stays at home.
5 mm is the standard for most pet carriers. It gives a good balance of padding, airflow and a carrier that still holds its shape. For the full range, see our neoprene sheet thickness guide.
| 3 mm | Light carriers for short trips and for small pets | Least padding; not enough for a long journey or a nervous pet |
|---|---|---|
| 5 mm | Most pet carriers; pet travel and vet visits | Best balance of padding, airflow and a firm shape |
| 7 mm | Long journeys, large pets and carriers checked as luggage | Most padding, but heavier and harder to carry |
Measure the pet, not the breed name. Measure the pet lying down from nose to tail base, and the height sitting up, and tell us the pet's weight: a carrier ordered by breed alone often fits the length and squeezes the height, or fits the height and leaves the pet no room to turn around. See our custom pet carriers — made to your design, 3–8 mm for the styles this thickness choice applies to. For a cat coat rather than a pet carrier, see our neoprene cat coats.
SBR is the standard choice for most pet carriers, and CR is the choice where the carrier will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a carrier used for vet visits, car trips and indoor travel. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a carrier sold for outdoor travel, flights and use in the sun.
Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it gives when the pet moves without a fight; SBR is firmer and holds the carrier square and neat between trips.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday pet carriers for vet visits and car travel | Outdoor, flight and premium pet carriers |
If the pet needs a blanket for rest at home rather than a bag for travel, the product changes: our neoprene pet blankets are made to lie flat for sleep, with a soft face, and a carrier and a blanket are ordered from different patterns.
Pet brands — carriers in your colours and with your logo, made to your pet size range, for owners who trust your name on every trip.
Pet shops — carriers in the sizes your customers actually own, with size marking that survives the shop floor, for owners of cats and small dogs.
Airline travel shops — carriers made to cabin size rules, so the pet flies in the cabin and the owner travels without worry.
Online pet stores — a carrier that photographs well, folds flat for shipping and fits a wide size range, for customers who buy travel gear online.
When neoprene is NOT the right choice
Tell us which of these your pet carrier needs.
Will my pet be able to breathe inside the carrier?
Yes. Breathable mesh windows are placed where the pet can see out and breathe without escaping, stitched through the foam so they stay in place — tell us the pet size and we place the windows to suit it.
Can the carrier be taken on a plane?
It can, if it is cut to cabin size rules. Tell us the airline's size limit and we cut the carrier to fit it — send the limit with your drawing and we confirm the size before sampling.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom pet carriers to your drawing, your size and your print, and we check the the fit on a sample on a sample before bulk production. The general minimum order is 200 pieces per design as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom pet carriers and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A pet carrier is judged on a long journey, not on a hanger. Send us the pet size and we will make you a sample to try with a real pet.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.