A neoprene makeup brush case is a soft roll or flat case made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that holds makeup brushes in slots to protect the bristles against bending and dust. Beauty brands and makeup shops order it for brush sets, professional kits and travel where the brushes must stay clean and in shape. It is not a makeup bag, so it holds brushes in slots instead of loose cosmetics. Send us your design drawing, the brush sizes and the case style, and we will confirm the best material and thickness for makeup brushes and beauty tools.
We manufacture custom makeup brush cases in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished makeup brush case under one roof, so a change can be checked on a sample before bulk production starts.
A brush case has to hold the brushes, so the slots matter more than the outside. We cut the case to the brush sizes with slots sized to each brush, so the brushes sit snug without bending the bristles, and the case rolls or folds to your drawing so the brushes stay covered in the bag. The inside face is smooth, so the bristles slide in without catching, and the edges are finished with a bound hem so they do not rub the handles.
The case is commonly closed with a tie, a strap or a zip to your drawing, stitched through the foam and bar-tacked at the fixing points, because a closure that pulls loose is the first thing a customer notices. A pocket can be added where you ask for it, so a sponge or a small tool travels with the brushes, and the whole case wipes clean after a day in a makeup bag.
3 mm is the standard for most makeup brush cases. It gives a good balance of brush protection, a slim roll and a case that still fits the handbag. For the full range, see our neoprene sheet thickness guide.
| 2 mm | Light rolls for a few brushes and for travel in a small bag | Least padding; not enough for expensive brushes in a busy bag |
|---|---|---|
| 3 mm | Most makeup brush cases; makeup brushes and beauty tools | Best balance of brush protection, a slim roll and an easy carry |
| 5 mm | Full brush sets, professional kits and rough travel | Most padding, but thicker and harder to fit in a handbag |
Measure the brushes, not the case you already own. Measure the full length of the longest brush and the handle width of the widest brush, and tell us how many brushes the case must hold: a case ordered by guess alone often fits the brushes and leaves no room for the set, or holds the set and will not fit the handbag. See our custom makeup brush cases — made to your design, 3–8 mm for the styles this thickness choice applies to. For a dining chair cover rather than a makeup brush case, see our neoprene dining chair covers.
SBR is the standard choice for most makeup brush cases, and CR is the choice where the case will travel in sun and heat. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a case used at home, in a studio or in a handbag. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a case sold for travel, outdoor shoots and use in the sun.
Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the brushes without a fight; SBR is firmer and holds the case flat and neat in the bag.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday makeup brush cases for home and studio | Travel, outdoor and premium makeup brush cases |
If the brushes need a flat organiser with pockets rather than a roll, the product changes: our neoprene jewelry organizers are built with necklace hooks and ring rolls for jewellery on the move, and a brush case and a jewellery organiser are ordered from different patterns.
Beauty brands — cases printed with your logo that travel with the brushes you sell, made to fit your brush set exactly.
Makeup shops — cases in your colours for the brush sets you stock, so every customer leaves with protection for their brushes.
Makeup artists — cases in your colours for the kit you carry to every shoot, so the brushes stay clean and your name is seen on set.
Gift companies — a branded case as a gift for beauty lovers, in your colours, for welcome packs and beauty events.
When neoprene is NOT the right choice
Tell us which of these your makeup brush case needs.
Will the slots fit my longest brush?
Yes, if you send the measurements. We cut the slots to the full length of the longest brush and the handle width of the widest brush — send both with your drawing and we cut to them, not to a standard size.
Can the case roll up for travel?
Yes. The case rolls or folds to your drawing so the brushes stay covered in the bag, and the tie or strap holds the roll shut — tell us the travel size and we cut the case to roll to it.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom makeup brush cases to your drawing, your size and your print, and we check the the fit on a sample on a sample before bulk production. The general minimum order is 200 pieces per design as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom makeup brush cases and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A brush case is judged every time the brushes go in and out. Send us the brush sizes and we will make you a sample to try with real brushes.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.