A neoprene camping sleeping pad is a thick padded mat made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 7 mm thick, that lies under a sleeping bag to cushion the body and insulate it from cold ground overnight. Outdoor shops and camping brands order it for tents, campsites and overnight trips where the ground is hard and cold. It is not a picnic mat, so it is thicker and made for sleeping through the night. Send us your design drawing, the pad size and the pad style, and we will confirm the best material and thickness for camping and overnight sleep.
We manufacture custom camping sleeping pads in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished camping sleeping pad under one roof, so a change can be checked on a sample before bulk production starts.
A sleeping pad has to cover the whole body, so the length matters more than the colour. We cut the pad to the length you ask for with square corners and a bound edge where you ask for it, so it does not curl up at the corners after months of rolling, and the base is made to grip the tent floor so the pad does not slide when the sleeper turns over. The top face is chosen for grip, because a pad that slips under a sleeping bag is a pad that ends up outside the tent.
The pad is commonly made in one piece of foam where the design allows it, because a pad made from one piece keeps its shape better than a pad pieced together from offcuts. A carry strap can be added where you ask for it, so the pad rolls small and straps to the outside of a pack, and the whole pad wipes clean after a muddy trip.
7 mm is the standard for most camping sleeping pads. It gives a good balance of cushioning, insulation and a pad that still rolls for the pack. For the full range, see our neoprene sheet thickness guide.
| 3 mm | Light pads for summer camping and for walkers who count every gram | Least cushioning; not enough for a full night on hard ground |
|---|---|---|
| 5 mm | Most camping pads for spring and autumn trips | Good balance of cushioning and a light roll |
| 7 mm | Most camping sleeping pads; camping and overnight sleep | Best balance of cushioning, insulation and a roll that fits the pack |
Measure the sleeper, not the tent. Measure the sleeper's height lying down and the width at the shoulders, and tell us whether the pad rolls or folds for the pack: a pad ordered by tent size alone often fits the tent and leaves the sleeper's feet on the ground, or fits the sleeper and will not roll into the pack. See our custom camping sleeping pads — made to your design, 3–8 mm for the styles this thickness choice applies to. For a picnic mat rather than a camping sleeping pad, see our neoprene picnic mats.
SBR is the standard choice for most camping sleeping pads, and CR is the choice where the pad will be used in wet weather. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a pad used in a tent, on dry ground or in a cabin. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a pad sold for wet campsites, beach camping and use in all weather.
Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it gives under the sleeper and springs back; SBR is firmer and holds the pad flat and square on the tent floor.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday camping sleeping pads for tents and dry ground | Wet campsite, beach and premium sleeping pads |
If the pad is only for sitting at lunch rather than sleeping overnight, the shape changes: our neoprene picnic mats are thinner and made to fold into a picnic basket, and a sleeping pad and a picnic mat are ordered from different patterns.
Outdoor shops — pads in your colours for tents and campsites, made to your pad size, for campers who sleep on hard ground.
Camping brands — pads printed with your logo that travel with the kit you sell, made to fit your range exactly.
Scout groups — matching pads for a whole troop, with size marking that survives the camp, for young campers on their first overnight trip.
Online outdoor stores — a pad that photographs well, rolls flat for shipping and fits a wide size range, for customers who buy camping gear online.
When neoprene is NOT the right choice
Tell us which of these your camping sleeping pad needs.
Will the pad keep me warm on cold ground?
Yes, if the thickness is right. The foam insulates the sleeper from cold ground, and 7 mm is the standard for overnight sleep — tell us the season and the ground and we confirm the best thickness for it.
Can the pad roll small enough for a backpack?
Yes. The pad rolls from one end and stays rolled with a strap where you ask for one — tell us the pack size and we cut the pad to roll to it.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom camping sleeping pads to your drawing, your size and your print, and we check the the comfort on a sample on a sample before bulk production. The general minimum order is 200 pieces per design as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom camping sleeping pads and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A sleeping pad is judged in the morning, not after five minutes. Send us the sleeper size and we will make you a sample to try on real ground.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.