NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Polyester Neoprene Fabric

  • Custom Neoprene Sherpa Fabric
  • Custom Neoprene Sherpa Fabric
Custom Neoprene Sherpa FabricCustom Neoprene Sherpa Fabric

Custom Neoprene Sherpa Fabric

  • Material: Laminated neoprene (SBR / SCR / CR foam + sherpa fabric)
  • Thickness: 1.5-45mm
  • LOGO/COLOR Options: Customized
  • Application: Winter coats and warm linings
  • Product description: Custom neoprene sherpa fabric made in our own factory in China, laminated in your colours, made to order.
  • INQUIRY

Custom Neoprene Sherpa Fabric

We laminate sherpa fabric onto neoprene foam in our own factory in China, where we have made neoprene products for 15 years, giving a warm, curly pile with the soft cushion of neoprene underneath, for winter coats and warm linings. Send us your design drawing, foam type and thickness, and we will confirm the best foam and fabric for your product.

 

Material
Laminated neoprene (SBR / SCR / CR foam + sherpa fabric)
Thickness
Customized to your thickness, 1.5–45 mm
Minimum order
20 sheets as a general minimum, adjustable
Lead time
15–18 days after order confirmation

 

Sherpa is a curly, long pile — the fabric that looks like sheep's wool and feels warm the moment you touch it. It is not the same as fleece: fleece is a short, flat pile, while sherpa is longer, curlier and thicker, and it feels warmer because of it.

We laminate the sherpa fabric onto SBR, SCR or CR foam, on one side or both, and the foam gives the sheet its body. A sherpa face with plain nylon on the other side is the usual order, and sherpa on both sides is available too. The sheet must show the foam and the lamination in the photo — a close-up of the pile alone does not show that it is neoprene.

Winter coats and warm linings are the natural home for this fabric. It suits coats, linings and warm bags that should feel cosy, and it holds its shape better than a plain fabric face. Our custom neoprene quilted fabric is the closest alternative in our range — stitched diamonds rather than a curly pile — and we will help you pick between the two if you are unsure.

Foam choice matters under a sherpa face. CR foam is the firmest of our three foams, with hardness 3–5°, density 276.32 kg/m³, tensile 860 kPa and elongation 550% (TDS v21); SBR 10–15° is softer and lighter, with density 158.34 kg/m³, tensile 256 kPa and elongation 185% (TDS v21). If you are unsure how thickness changes the feel of a sheet, our neoprene sheet thickness guide explains it step by step.

 

Which Thickness Should You Choose?

The thickness here is the foam thickness under the sherpa face. The fabric is the same; the foam is what changes the feel of the finished product.

Thin foam — light winter coats and linings. A thin foam under the sherpa face keeps the sheet light and easy to sew, for light winter coats and linings that should drape and fold.

Medium foam — the most popular choice. Our most ordered thickness for sherpa-faced sheets, with real body and cushioning for warm coats that hold their shape.

Thick foam — thick winter coats and warm bags. A thick foam under the sherpa face gives the most structure and warmth, for thick winter coats and warm bags that stand up on their own.

Tell us the product and how it will be used, and we will recommend the foam thickness — from 1.5 mm to 45 mm, to your specification. Our custom neoprene quilted fabric is the stitched face in the same T-fabric range.

 

Specifications

ItemSpecification
MaterialLaminated neoprene (SBR / SCR / CR foam + sherpa fabric)
ThicknessCustomized to your thickness, 1.5–45 mm
Fabric FaceSherpa, sherpa pile, curly long pile
LaminationSingle or double-sided
Sheet Size51″ × 130″
Foam OptionsSBR, SCR or CR foam
ColourCream and white as standard; other sherpa colours on request
PackagingFlat-packed sheets, in cartons
ApplicationWinter coats and warm linings

CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports; our CR figures are hardness 3–5°, density 276.32 kg/m³, tensile 860 kPa and elongation 550% (TDS v21). SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags and casual wear; our SBR 10–15° figures are density 158.34 kg/m³, tensile 256 kPa and elongation 185% (TDS v21). SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.

 

Who Orders Neoprene Sherpa Fabric From Us?

Coat and jacket brands — sherpa-faced sheets for winter coats and warm linings, cut to your patterns and your colours.Fashion brands — a warm, curly pile with a neoprene body, for coats and fashion pieces that should feel cosy.
Fashion sellers — a fabric that stands out on a shelf, for ranges that mix warm piles with softer, more casual materials.Fabric distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market.

 

Customisation Options

  • Foam: SBR, SCR or CR foam under the sherpa face, to your product.
  • Thickness: foam thickness from 1.5 mm to 45 mm, to your specification.
  • Sheet size: standard 51″ × 130″, or cut to your size on request.
  • Lamination: sherpa on one side with plain nylon on the other, or sherpa on both sides.
  • Colour: Cream and white as standard; other sherpa colours on request.
  • Packaging: flat-packed sheets, in cartons, with your labels on request.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. Fabric type and required sheet size
  3. Required foam thickness (from 1.5 mm to 45 mm)
  4. Foam type, if known (SBR, SCR or CR)
  5. Colour requirements
  6. Estimated order quantity and destination country

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

 

Frequently Asked Questions

Is sherpa different from fleece?
Yes. Fleece is a short, flat pile; sherpa is a longer, curlier pile that feels thicker and warmer. The two look similar at a distance, but the hand is completely different.

What foam types can be used under the sherpa fabric?
SBR, SCR or CR foam. Tell us the product and we will help you pick the foam for it.

What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling. Send us your design drawing and fabric details and we will confirm the sample details.

How long does bulk production take?
Usually 15–18 days after order confirmation, depending on the quantity and customisation.

How do I order?
Send your design drawing, the fabric type and colour, foam type, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.