We laminate anti-slip fabric onto neoprene foam in our own factory in China, where we have made neoprene products for 15 years, giving a grip face with the soft cushion of neoprene underneath, for grips, supports and sports gear. Send us your design drawing, foam type and thickness, and we will confirm the best foam and fabric for your product.
| Material Laminated neoprene (SBR / SCR / CR foam + anti-slip fabric) | Thickness Customized to your thickness, 1.5–45 mm | Minimum order 20 sheets as a general minimum, adjustable | Lead time 15–18 days after order confirmation |
Anti-slip fabric is a face that grips. Small grip dots and a textured surface stop a hand, a foot or a piece of gear from sliding — on a sports grip, a support strap or a pad that must stay where it is put. A smooth face slides; an anti-slip face holds.
We laminate the anti-slip fabric onto SBR, SCR or CR foam, on one side or both, and the foam gives the sheet its body. An anti-slip face with plain nylon on the other side is the usual order, and anti-slip on both sides is available too. The sheet must show the foam and the lamination in the photo — a close-up of the dots alone does not show that it is neoprene.
Grips, supports and sports gear are the natural home for this fabric. It suits sports grips, support straps and pads that must not slip, and it holds its shape better than a plain fabric face. Our custom neoprene neon fabric is the closest alternative in our range — a bright face for sports gear rather than a grip face — and we will help you pick between the two if you are unsure.
Foam choice matters under a anti-slip face. CR foam is the firmest of our three foams, with hardness 3–5°, density 276.32 kg/m³, tensile 860 kPa and elongation 550% (TDS v21); SBR 10–15° is softer and lighter, with density 158.34 kg/m³, tensile 256 kPa and elongation 185% (TDS v21). If you are unsure how thickness changes the feel of a sheet, our neoprene sheet thickness guide explains it step by step.
The thickness here is the foam thickness under the anti-slip face. The fabric is the same; the foam is what changes the feel of the finished product.
Thin foam — light grips and supports. A thin foam under the anti-slip face keeps the sheet light and easy to sew, for light grips and supports that should drape and fold.
Medium foam — the most popular choice. Our most ordered thickness for anti-slip-faced sheets, with real body and cushioning for sports gear that must not slip.
Thick foam — firm supports and heavy sports gear. A thick foam under the anti-slip face gives the most structure and warmth, for firm supports and heavy sports gear that stand up on their own.
Tell us the product and how it will be used, and we will recommend the foam thickness — from 1.5 mm to 45 mm, to your specification. Our custom neoprene neon fabric is the bright face in the same coated range, for sports gear that must be seen.
| Item | Specification |
|---|---|
| Material | Laminated neoprene (SBR / SCR / CR foam + anti-slip fabric) |
| Thickness | Customized to your thickness, 1.5–45 mm |
| Fabric Face | Anti-slip, anti-slip grip dots and texture |
| Lamination | Single or double-sided |
| Sheet Size | 51″ × 130″ |
| Foam Options | SBR, SCR or CR foam |
| Colour | Black as standard; custom colours on request |
| Packaging | Flat-packed sheets, in cartons |
| Application | Grips, supports and sports gear |
CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports; our CR figures are hardness 3–5°, density 276.32 kg/m³, tensile 860 kPa and elongation 550% (TDS v21). SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags and casual wear; our SBR 10–15° figures are density 158.34 kg/m³, tensile 256 kPa and elongation 185% (TDS v21). SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.
| Sports brands — anti-slip-faced sheets for grips and sports gear, cut and laminated to your specification and your colours. | Support makers — a grip face with a neoprene body, for supports and straps that must stay where they are put. |
| Gear sellers — a fabric that holds in the hand, for ranges that mix grip faces with softer, more casual materials. | Fabric distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market. |
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
What makes the fabric anti-slip?
Small grip dots and a textured surface on the face, which stop a hand or a piece of gear from sliding. Tell us what the face must hold and we will suggest the grip pattern for it.
What foam types can be used under the anti-slip fabric?
SBR, SCR or CR foam. Tell us the product and we will help you pick the foam for it.
What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling. Send us your design drawing and fabric details and we will confirm the sample details.
How long does bulk production take?
Usually 15–18 days after order confirmation, depending on the quantity and customisation.
How do I order?
Send your design drawing, the fabric type and colour, foam type, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.