We foam CR neoprene in our own factory in China, where we have made neoprene products for 15 years, and split it to 1.5 mm — the thinnest sheet our splitting line can make. Send us your design drawing or specification, thickness and sheet size, and we will confirm the best foam grade for your product.
| Material CR neoprene foam | Thickness 1.5 mm | Minimum order 20 sheets as a general minimum, adjustable | Lead time 15–18 days after order confirmation |
A 1.5 mm sheet is about lightness. Every gram and every millimetre counts in a light wetsuit, and a thin sheet is what makes the finished garment easy to move in.
We foam the CR rubber, split the bun to 1.5 mm, and check the thickness across the sheet before it leaves the line. The sheet can be supplied plain, or laminated with nylon, T-fabric, polyester or lycra, on one side or both, in your colours.
Thin sheets need careful handling in cutting and laminating, because they stretch more easily than a thick sheet. We pack the sheets flat so they arrive without creases or folds.
This product is split to 1.5 mm. The question is whether 1.5 mm is right for your product, or whether a thicker sheet would serve it better.
1.5 mm — light wetsuits and linings. Our thinnest CR split, for light wetsuits in warm water and for linings inside thicker products, where flexibility matters most.
3–5 mm — general wetsuits and sports products. The middle of our range, for wetsuits and sports goods that need real warmth as well as flexibility.
7 mm and above — cold water and thick products. For cold-water diving suits and thick products where warmth matters more than weight, up to 45 mm on request.
Tell us the product and how it will be used, and we will recommend the thickness — this 1.5 mm sheet, or a thicker split from the same CR foam.
| Item | Specification |
|---|---|
| Material | CR neoprene foam |
| Thickness | 1.5 mm |
| Sheet Size | 51″ × 130″ |
| Hardness | 3–5° Shore C |
| Density | 276.32 kg/m³ |
| Tensile Strength | 860 kPa |
| Elongation | 550% |
| Lamination | Nylon, T-fabric, polyester or lycra, single or double-sided |
| Application | Light wetsuits, linings |
CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports. SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags, sleeves and pads. SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.
| Wetsuit makers — thin CR sheets for light wetsuits, cut and laminated to your specification and your colours. | Garment makers — 1.5 mm sheets for linings inside thicker wetsuits, boots and gloves, where a thin layer adds warmth without bulk. |
| Sports brands — thin CR foam for light sports products that need flexibility first and warmth second. | Foam distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market. |
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
What is 1.5mm CR neoprene foam?
CR foam split to 1.5 mm — the thinnest our line can split. Tensile strength 860 kPa and elongation 550% (TDS). The foam is RoHS and REACH compliant.
Can 1.5mm CR sheets be laminated with fabric?
Yes. We laminate nylon, T-fabric, polyester or lycra onto the foam, on one side or both, in your colours.
What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling. Send us your specification and we will confirm the sample details.
How long does bulk production take?
Usually 15–18 days after order confirmation, depending on the quantity and specification.
How do I order?
Send us your design drawing or specification, the foam grade, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.