NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene News

Custom Neoprene Rifle Scope Covers: Size, Fit and Protection Guide

Other Language Version

Share:

Custom Neoprene Rifle Scope Covers: Size, Fit and Protection Guide for Hunters and Brands

A custom neoprene rifle scope cover is a 3 mm neoprene sleeve that slides over a riflescope and guards both lenses against scratches, dust and rain. It is the cheapest protection for a scope worth hundreds of dollars, and it fits objectives from 32 mm to 56 mm. We make them to order in any size, colour and logo.

What Is a Neoprene Rifle Scope Cover, and What Does It Protect?

A neoprene rifle scope cover is a stretch sleeve made from chloroprene rubber foam, laminated with nylon fabric on one or both faces. It pulls over the whole scope — objective bell, tube and eyepiece — and closes with an elastic hem or a hook-and-loop tab. It protects the glass from scratches, dust, rain and knocks in the field and in the gun cabinet.

Black neoprene scope cover with red trim, and a camouflage cover fitted on a rifle scope

A black neoprene scope cover with red trim, and a camouflage cover fitted on a rifle scope.

The cover does not replace lens caps. It is a skin, not a hard case — it takes the scrapes instead of the scope, so a scope that rides in a truck or a scabbard all season still holds zero and stays clear. It is also quiet: soft neoprene makes no noise against brush or metal, unlike a hard plastic cap. Our guide to custom neoprene hunting gear explains where neoprene fits across a full hunting kit.

A scope cover is not a gun case. A neoprene gun case or rifle sleeve protects the whole rifle; a scope cover protects only the optic. Most hunters own both — the case for transport, the cover for the field.

How Thick Should the Neoprene Be?

3 mm is the standard. SENTRY's Scopecoat, the best-known neoprene scope cover, is made from a standard 3 mm Neoprene/Nylon laminate, and its heavy-duty Extreme version steps up to 6 mm. Scopecoat's own specification lists 3 mm as the standard build. The foam is the same CR neoprene we use for wetsuits and protective gear.

Below 2 mm, the cover tears at the hem and offers no cushion; above 6 mm, it is hard to pull on and adds bulk. For a cover that must stretch over a 50 mm objective bell, 3 mm is the thickness most makers use.

Thickness is only half the story. The foam must be closed-cell neoprene: closed cells do not soak up water, so the cover sheds rain instead of holding it. A full-length slip-on cover listed for 50–60 mm objectives is 3 mm thick, waterproof and elastic, and 14 inches long — see the Tourbon listing for a typical build.

Slip-On Sleeve vs Flip-Up Caps: Which One Do You Need?

Slip-on neoprene protects the whole scope; flip-up caps protect only the lenses. The right choice depends on whether the scope is in use or in storage.

A slip-on sleeve covers the objective bell, the tube and the eyepiece. It is the best choice for transport, storage and bad weather — pull it off when you are ready to shoot. Vortex's Sure Fit cover works this way: a stretch neoprene sleeve in four sizes by scope length, from 9 to 15.5 inches — see the Vortex Sure Fit cover.

Flip-up caps are hard plastic lids that hinge open at a touch — Butler Creek's Flip-Open covers are the standard. They stay on the scope while you shoot and open in a second, but they protect only the glass, not the tube. They are sized to the exact outside diameter of the lens housing, and Butler Creek's fit rule is 0.01 inch under to 0.025 inch over your measured diameter — see the Butler Creek sizing guide.

What Size Do I Need?

Measure the scope, not the box. Two numbers decide the fit: the objective lens size and the outside diameter of the objective housing. Measure the housing with calipers — the lens size alone is not enough, because two 50 mm scopes can have housings 2 mm apart.

Scope cover sizes — objective lens, typical housing diameter and matching covers (Butler Creek sizes: Butler Creek size chart; fit range 0.01 in under to 0.025 in over).
Objective Lens Typical Housing Diameter Butler Creek Objective Cover Custom Neoprene Slip-On Size
32 mm 40–42 mm #17 (40.9 mm) S
40 mm 46–48 mm #27 (46.7 mm) M
44 mm 49–51 mm #31 (50.07 mm) L
50 mm 56–58 mm #40 (57.2 mm) L
56 mm 61–63 mm #47 (62.5 mm) XL

Sources: Butler Creek size chart; Butler Creek fit rule; Vortex Sure Fit sizing.

When in doubt, take the larger size: a loose sleeve still protects, a tight one splits at the hem. Always measure the eyepiece too — eyepiece housings run 39–45 mm, and a sleeve must stretch over both ends.

Will a Neoprene Cover Keep Fog and Rain Off the Glass?

It keeps rain and dust off, and it cuts condensation — but it is not a dry bag. Closed-cell neoprene does not absorb water, so rain beads and runs off the sleeve. Our guide to neoprene waterproofing explains the difference in plain terms: neoprene sheds water, but it is not a sealed dry bag.

Condensation is the real enemy. A cold scope brought into a warm cabin fogs in minutes. A neoprene sleeve insulates the tube, so the glass warms slowly and fogs less — the same reason camouflage gun sleeves stop condensation on the rifle itself. For a full weatherproofing routine, read our gun case weatherproofing guide.

In a downpour, water finds the seams and the open ends first. A cover with sealed seams holds up longer than one with plain stitched seams, because stitching punches holes through the foam.

Your Trusted Custom Neoprene Rifle Scope Cover Manufacturer

Stop buying plain covers that tear or slip off. We are a specialized custom neoprene factory. We manufacture rifle scope covers, fishing and hunting gear and hunting dog gear for brands worldwide.

When you partner with our factory for custom OEM scope covers, you get precision production: slip-on covers for 32 to 56 mm objectives in five sizes, Pantone-matched colours, camouflage prints, printed logos, and low minimum order quantities for brand runs.

Do you want to launch a branded line of neoprene rifle scope covers? We accept custom OEM orders with full branding options, tailored sizes, and low minimum order quantities.

  • True 3 mm closed-cell neoprene, soft grip and cushion, 6 mm heavy-duty option.
  • Five sizes for 32–56 mm objectives, with elastic hem and hook-and-loop tab.
  • Low Minimum Order Quantities (MOQ) for custom brand runs.

Learn more about our OEM production capabilities on our official website: https://source.neoprenecustom.com

Ready to design a custom scope cover? Contact our team directly: kevin@neoprenecustom.com

Camouflage neoprene scope cover alone and fitted over the scope of a wooden-stock rifle

A camouflage neoprene scope cover — shown alone and fitted over the scope of a wooden-stock rifle.

Frequently Asked Questions (FAQ)

Q: Will a neoprene scope cover fit my 3-9x40 scope?
A: Yes — a size M slip-on cover fits 40 mm objectives, and a Butler Creek #27 cap fits a 46.7 mm housing. Measure the housing with calipers first: two 40 mm scopes can differ by 2 mm.

Q: Can I leave the cover on while shooting?
A: No for a slip-on sleeve — pull it off before you shoot, because it covers the lenses. Flip-up caps are the exception: they hinge open in a second and stay on the scope. Use the sleeve for transport and storage, caps for the stalk.

Q: Is a neoprene scope cover waterproof?
A: It sheds rain well, because closed-cell neoprene does not absorb water. In heavy rain, water gets in at the seams and open ends, so the cover is water-resistant, not waterproof. Ask for sealed seams if your customers hunt in wet weather.

Q: Will neoprene damage the scope's lenses or finish?
A: No. Soft neoprene with a nylon lining will not scratch coated glass or anodised tubes. Keep the inside clean — grit trapped inside the sleeve is what scratches, not the neoprene itself.

Q: How can we order custom colours and logos?
A: Send your objective sizes, Pantone colours, camouflage pattern and logo file to kevin@neoprenecustom.com for a quotation. We print the logo on the sleeve and match one colour per size.

TIANCHI UPDATES

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.