NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Bags

  • Neoprene Wet Bags
  • Neoprene Wet Bags
  • Neoprene Wet Bags
Neoprene Wet BagsNeoprene Wet BagsNeoprene Wet Bags

Neoprene Wet Bags

A neoprene wet bag is a soft waterproof-lined bag made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that holds wet swimwear, nappies or towels inside so the wet does not leak out onto dry clothes. Swim shops, baby brands and travel stores order it for wet swimwear and baby items, because it keeps the wet in and folds flat when empty. It is not a dry bag, so it does not keep water out the way a sealed dry bag does. Send us your design drawing, the bag size and the zip style, and we will confirm the best material and thickness for wet swimwear and baby items.

We manufacture custom neoprene wet bags in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished wet bag under one roof, so a change to the bag size or the zip can be checked on a sample before bulk production starts.

A wet bag is judged by the seal, so the zip and the lining matter more than the print. We cut the bag to your size with a waterproof zip where you ask for it and a wipe-clean lining inside, so wet swimwear sits inside without soaking through to the dry clothes beside it, and the seams are stitched and bound so water does not leak out at the corners. The whole bag wipes clean after use and dries flat, so it is ready for the next swim.

 

What thickness of neoprene is best for a wet bag?

3 mm is the standard for most wet bags. It gives a good balance of a watertight hold, a slim shape and a bag that still folds flat, which is why most of the wet bags we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.

3 mmMost wet bags; wet swimwear, nappies and towelsBest balance of a watertight hold and a slim, foldable fit
5 mmThicker wet bags for heavy wet loads and for a padded feelMore padding, but heavier to carry in a beach bag
7 mmLarge wet bags and bags that travel in a car bootMost padding, but stiff to fold flat

Measure the load, not the bag. Tell us what will go inside — the number of swimsuits, the nappies and the towel — and we cut the bag to that load: a bag ordered by length alone often comes out too narrow for the towel, or too small to zip over the wet clothes. Send the size of the largest item too, so the opening is cut wide enough to load it. See our custom wet bags — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a bag that keeps water out rather than a bag that keeps wet clothes in, our neoprene dry bags are the closer page.

 

SBR or CR neoprene — which is right for wet bags?

SBR is the standard choice for most wet bags, and CR is the choice where the bag will be used in seawater. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a bag used at a pool or on a beach holiday. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a bag sold with beach gear or used in salt water every day.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the lining without a fight; SBR is firmer and holds the bag flat and square when it is folded. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday wet bags for pools and holidaysBeach, sea and premium wet bags

If the bag must carry dry clothes to the beach rather than wet clothes home, the shape changes: Our neoprene beach tote bags are cut from the same laminated neoprene, and the two are ordered from different patterns.

 

Who is a neoprene wet bag for — and who is it not for?

Swim shops — wet bags in your colours for swimmers who need a dry bag beside the wet one, made to your size.

Baby brands — a bag printed with your logo for nappies and wet baby clothes, made to the size your customers actually carry.

Travel stores — a bag that folds flat in a suitcase and keeps wet swimwear away from dry clothes on the trip home.

Gift companies — a branded wet bag as a gift for swim clubs and baby showers, in your colours.

When neoprene is NOT the right choice

  • If the bag must keep water out — a dry bag with a roll-top seal, not a wet bag, is the right product.
  • If the bag must hold a full wet wetsuit — a larger wet bag or a wetsuit bag fits a wetsuit better than a small wet bag.
  • If the bag must be fully waterproof — neoprene resists splashes, but a wet bag is not a dry bag and will not keep water out in rain.
  • If the lowest possible unit cost is the whole brief — a thin plastic wet bag fits a one-season budget better than a neoprene bag.

 

Customisation Options

Tell us which of these your wet bag needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Zip: a waterproof zip where you ask for it, so the wet stays inside the bag.
  • Lining: a wipe-clean lining inside, so the bag wipes dry after use.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will wet swimwear leak onto my dry clothes?
No, not if the zip and lining are fitted right. The waterproof zip closes the bag and the wipe-clean lining holds the wet inside, so dry clothes packed beside it stay dry — tell us the load and we will size the bag to it.

Can I wash the wet bag after use?
Yes. The whole bag wipes clean with a cloth and dries flat, so it is ready for the next swim — do not put it in a hot dryer, and let it dry flat out of the sun.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the bag size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom wet bags to your drawing, your size and your print, and we check the zip and the lining on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom wet bags and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The bag size, and what will go inside it
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A wet bag is judged by dry clothes staying dry. Send us the load size and we will make you a sample to try with real wet swimwear.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.