A neoprene motorcycle seat cover is a stretchy waterproof cover made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that wraps a motorcycle seat to protect it against rain, sun and wear, and to give the rider a softer, grippier seat. Motorcycle accessory brands and bike shops order it for riders whose seats crack in the sun or soak up rain. It is not a bicycle seat cover, so it is cut for a long motorcycle seat instead of a small bicycle saddle. Send us your design drawing, the seat size and the cover style, and we will confirm the best material and thickness for motorcycles and riding comfort.
We manufacture custom motorcycle seat covers in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished motorcycle seat cover under one roof, so a change can be checked on a sample before bulk production starts.
A motorcycle seat cover has to follow the seat, so the seat shape matters more than the colour. We cut the cover to the seat measurement with an elastic fit, so the same design stretches over the seat without gaping at the sides, and the bottom edge is finished with an elastic hem so it does not ride up at speed. The seat panel is shaped to follow the seat so the cover does not bunch under the rider.
The cover is commonly made with an elastic edge, stitched through the foam and bar-tacked at the fixing points, because an edge that pulls loose at speed is the first thing a rider notices. The top face is textured where you ask for it, so the rider does not slide on the seat, and the whole cover wipes clean after a rainy ride.
3 mm is the standard for most motorcycle seat covers. It gives a good balance of weather protection, grip and a cover that still fits the seat shape. For the full range, see our neoprene sheet thickness guide.
| 2 mm | Light covers for garaged bikes and for short rain showers | Least padding; not enough for a bike parked outside all winter |
|---|---|---|
| 3 mm | Most motorcycle seat covers; motorcycles and riding comfort | Best balance of weather protection, grip and a snug fit |
| 5 mm | Bikes parked outside, long tours and riders who want the thickest cover | Most protection, but heavier and harder to fold for the pannier |
Measure the seat, not the bike model. Measure the seat length, width and thickness, and tell us whether the seat is stepped or flat: a cover ordered by bike model alone often fits the length and gaps at the sides, or fits the sides and pulls short at the tail. See our custom motorcycle seat covers — made to your design, 3–8 mm for the styles this thickness choice applies to. For a car seat organizer rather than a motorcycle seat cover, see our neoprene car seat organizers.
SBR is the standard choice for most motorcycle seat covers, and CR is the choice where the cover will live outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a cover used on a garaged bike or for short rides. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a cover sold for bikes parked outside, touring and use in all weather.
Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the seat without a fight; SBR is firmer and holds the cover flat and neat on the bike.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday motorcycle seat covers for garaged bikes | Outdoor, touring and premium motorcycle seat covers |
If the seat is a small bicycle saddle rather than a long motorcycle seat, the product changes: our neoprene bicycle seat covers are cut small for a bicycle saddle, and a motorcycle seat cover and a bicycle seat cover are ordered from different patterns.
Motorcycle accessory brands — covers in your colours and with your logo, made to your seat size range, for riders who trust your name on every ride.
Bike shops — covers in the sizes your customers actually ride, with size marking that survives the shop floor, for owners of touring and commuter bikes.
Online bike stores — a cover that photographs well, folds flat for shipping and fits a wide size range, for customers who buy seat protection online.
Touring clubs — covers in your club colours for the riders in your club, so every bike looks the part and your club name is seen on every ride.
When neoprene is NOT the right choice
Tell us which of these your motorcycle seat cover needs.
Will the cover stay on at speed?
Yes, if the elastic edge is cut to the seat. We cut the cover to the seat length, width and thickness with an elastic hem, so it does not ride up at speed — send the seat measurements and we cut to them, not to a bike model.
Can the cover protect the seat from rain?
Yes, for rain and sun. The foam resists water and the whole cover wipes clean after a rainy ride — tell us how the bike is parked and we confirm the best material for it.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom motorcycle seat covers to your drawing, your size and your print, and we check the the fit on a sample on a sample before bulk production. The general minimum order is 200 pieces per design as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom motorcycle seat covers and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A motorcycle seat cover is judged on a long ride, not on a hanger. Send us the seat size and we will make you a sample to try on a real bike.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.