NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene For Bracer

  • Neoprene Head Guards
  • Neoprene Head Guards
  • Neoprene Head Guards
Neoprene Head GuardsNeoprene Head GuardsNeoprene Head Guards

Neoprene Head Guards

A neoprene head guard is a padded cap made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that covers the skull and the ears to soften knocks in contact sport. Rugby clubs and boxing gyms order it for forwards, scrum-halves and sparring partners whose heads take repeated impact. It is not a helmet, so it does not protect against a hard fall the way a rigid helmet does. Send us your design drawing, the head sizes and the guard style, and we will confirm the best material and thickness for head protection in rugby and boxing.

We manufacture custom head guards in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished head guard under one roof, so a change can be checked on a sample before bulk production starts.

A head guard has to stay on a moving head, so the chin strap matters more than the padding alone. We cut the guard to the head measurement with a shaped ear pocket, so the ears sit inside the padding without folding, and the chin strap is placed where it holds the guard down without pressing on the throat. The forehead panel is shaped to follow the brow so the guard does not slip down over the eyes when the player runs.

The guard is commonly closed with a hook-and-loop chin strap and a lace or strap at the back, both stitched through the foam and bar-tacked at the fixing points, because a strap that pulls loose in a scrum is the first thing a player notices. The ear area can be left open for hearing where you ask for it, or covered for full protection, and the edges are finished with a bound hem so they do not rub the skin. The fabric face wipes clean after a muddy match, and the foam inside cushions impact without soaking up sweat the way a cotton cap does.

 

What thickness of neoprene is best for a head guard?

5 mm is the standard for most head guards. It gives a good balance of impact padding, ear protection and a guard that still lets the player hear. For the full range, see our neoprene sheet thickness guide.

3 mmLight guards for training and for young players learning contactLeast padding; not enough for a hard clash of heads
5 mmMost head guards; rugby, boxing training and martial artsBest balance of impact padding, ear cover and hearing
7 mmFront-row forwards and heavy contact trainingMost padding, but heavier and warmer over a full match

Measure the head, not the hat size. Measure around the head above the eyebrows and over the ears, and tell us whether the player wears a mouthguard with it: a guard ordered by hat size alone often fits the crown and squeezes the ears, or fits the ears and slips down over the eyes. See our custom head guards — made to your design, 3–8 mm for the styles this thickness choice applies to. For a sports chest protector rather than a head guard, see our neoprene sports chest protectors.

 

SBR or CR neoprene — which is right for head guards?

SBR is the standard choice for most head guards, and CR is the choice where the guard will be used outdoors in sun and rain. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a guard worn for indoor boxing training or martial arts. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a guard sold for rugby and outdoor contact sports in all weather.

Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the skull without a fight; SBR is firmer and holds the guard round and neat between matches.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday head guards for training and indoor sportsOutdoor, contact and premium head guards

If the chest needs protection rather than the head, the product changes: our neoprene sports chest protectors are built around the chest and ribs for tackles and fast balls, and a head guard and a chest protector are ordered from different patterns.

 

Who is a neoprene head guard for — and who is it not for?

Rugby clubs — guards in your club colours for the whole squad, made to your head size range, for players who take contact every week.

Boxing gyms — guards in your colours for sparring partners, so training stays safe and your gym name is seen in every session.

Sports brands — guards printed with your logo that travel with the kit you sell, made to fit your size range exactly.

Online sports stores — a guard that photographs well, folds flat for shipping and fits a wide size range, for customers who buy head protection online.

When neoprene is NOT the right choice

  • If the player needs a rigid helmet — a hard helmet protects against a hard fall better than a soft neoprene guard.
  • If the player has had a head injury — this is a protective guard, not a medical device, and a clinician should be asked first.
  • If the guard must be very light for a sprint — a thin skull cap fits a speed brief better than a padded guard.
  • If the lowest possible unit cost is the whole brief — a thin fabric cap fits a one-season budget better than a laminated neoprene guard.

 

Customisation Options

Tell us which of these your head guard needs.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Sizes: graded to your own size chart, from youth to adult, with an adjustable chin strap.
  • Ear cover: open ear holes for hearing, or full ear cover for protection, to your design.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will the player still hear the call with the guard on?
Yes, if the ears are cut for it. The ear area can be left open for hearing where you ask for it, or covered for full protection — tell us which your players need and we cut the ear pocket to suit.

Can the guard be worn with a mouthguard?
Yes. The chin strap is placed so it holds the guard down without pressing on the mouthguard, and the forehead panel sits above the brow — tell us the mouthguard style and we check the fit on the sample.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom head guards to your drawing, your size and your print, and we check the the fit on a sample on a sample before bulk production. The general minimum order is 200 pieces per design as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom head guards and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The head sizes you need, with your size chart
  3. The guard style — open ears or full ear cover
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A head guard is judged in the first scrum, not on a hanger. Send us the head sizes and we will make you a sample to try on a real player.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.