A neoprene gift bag is a soft presentation bag made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that holds a gift and carries a printed greeting or a brand design for birthdays, holidays and promotions. Gift shops, brands and event organisers order it for gifts and promotions, because it looks better than paper, folds flat to post and is kept long after the gift is opened. It is not a shopping bag, so it is not cut for the same heavy load as a grocery bag. Send us your design drawing, the bag size and the artwork, and we will confirm the best material and thickness for gifts and promotions.
We manufacture custom neoprene gift bags in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished gift bag under one roof, so a change to the bag size or the print can be checked on a sample before bulk production starts.
A gift bag is judged by the print, so the artwork matters more than the stitching. We print the fabric face before the bag is cut where the design allows it, because a print laid down first sits square on the finished bag instead of drifting to one side, and the handles are stitched through the foam and bar-tacked at the fixing points, so the bag carries the gift without the handles pulling away. The base is cut flat so the bag stands on a table instead of tipping over.
3 mm is the standard for most gift bags. It gives a good balance of a soft drape, a firm shape and a bag that still folds flat, which is why most of the gift bags we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.
| 3 mm | Most gift bags; birthdays, holidays and promotions | Best balance of a soft drape and a firm, foldable fit |
|---|---|---|
| 5 mm | Thicker gift bags for heavy gifts and for a padded feel | More padding, but heavier to post flat |
| 7 mm | Premium gift bags and bags for large gifts | Most padding, but stiff to fold flat |
Measure the gift, not the bag. Tell us the largest gift size and the gift weight, and we cut the bag to that gift: a bag ordered by length alone often comes out too narrow for the gift box, or too tall to stand on a table. Send the artwork at the same size as the finished bag, so the print sits square on the front. See our custom gift bags — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a bag worn on the chest rather than a gift bag for presentation, our neoprene chest bags are the closer page.
SBR is the standard choice for most gift bags, and CR is the choice where the bag will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a bag used indoors for gifts and promotions. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a bag sold with beach gear or left in the sun.
The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the bag panels without a fight; SBR is firmer and holds the bag upright and square on a table. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday gift bags for birthdays and promos | Outdoor and premium gift bags |
If the gift needs a small pouch rather than a presentation bag, the shape changes: Our neoprene coin purses are cut from the same laminated neoprene, and the two are ordered from different patterns.
Gift shops — gift bags in your shapes and colours for birthdays and holidays, made to your artwork and your size range.
Brands — a bag printed with your greeting or your logo that customers keep long after the gift is opened.
Event organisers — a branded gift bag for conferences and welcome packs, in your colours, that guests take home.
Corporate gift buyers — a presentation bag for staff gifts and client gifts, in your colours, that carries your name to the desk.
When neoprene is NOT the right choice
Tell us which of these your gift bag needs, and we will build the sample to your drawing.
Can I print a different greeting on each bag?
Yes, where you ask for it. Sublimation printing suits short runs of different designs, so tell us how many designs you need and we will confirm the best way to run them — one design per bag costs more to set up than one design for the whole order.
Will the gift bag stand up on a table?
Yes, if the base is cut right. The base is cut wide and flat, so the bag stands upright on a table with the gift inside — send the gift size and weight and we will size the base to it.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the bag size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom gift bags to your drawing, your size and your print, and we check the print and the handles on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom gift bags and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A gift bag is judged by the gift inside and the print outside. Send us the gift size and the artwork and we will make you a sample to try with a real gift.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.