A neoprene document holder is a flat zip case made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that holds documents, contracts and certificates flat so they do not bend, crease or get wet in a bag. Office suppliers and corporate gift brands order it for meetings, travel and daily office carry where papers must arrive flat. It is not a book cover, so it holds loose papers instead of wrapping one book. Send us your design drawing, the paper size and the holder style, and we will confirm the best material and thickness for documents and office carry.
We manufacture custom document holders in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished document holder under one roof, so a change can be checked on a sample before bulk production starts.
A document holder has to keep papers flat, so the size matters more than the colour. We cut the holder to the paper size you ask for with a zip that runs around three sides, so the papers slide in flat without bending a corner, and the inside face is smooth, so the papers do not catch when they are pulled out. The edges are finished with a bound hem so they do not fray after months of daily use.
The holder is commonly closed with a zip, placed so its teeth never touch the papers when the holder is opened and closed, and the seams are placed at the edges where they do not press on the documents. A card pocket can be added where you ask for it, so a business card or a pen travels with the papers, and the whole holder wipes clean after a day in a busy bag. We check the finished holder by sliding real papers in and out several times, because a holder that bends a corner is a holder that stays at home.
3 mm is the standard for most document holders. It gives a good balance of paper protection, a slim fold and a holder that still fits the briefcase. For the full range, see our neoprene sheet thickness guide.
| 2 mm | Light holders for a few sheets and for travel in a small bag | Least padding; not enough for a full contract file in a busy bag |
|---|---|---|
| 3 mm | Most document holders; documents and office carry | Best balance of paper protection, a slim fold and an easy carry |
| 5 mm | Thick files, contracts and rough travel | Most padding, but thicker and harder to fit in a briefcase |
Measure the papers, not the briefcase. Measure the paper size — A4, letter or legal — and tell us how many sheets the holder must carry: a holder ordered by guess alone often fits the papers and leaves no room for the file, or holds the file and will not fit the briefcase. See our custom document holders — made to your design, 3–8 mm for the styles this thickness choice applies to. For a book cover rather than a document holder, see our neoprene book covers.
SBR is the standard choice for most document holders, and CR is the choice where the holder will travel in sun and heat. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a holder used in the office, at meetings or in a briefcase. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a holder sold for travel, outdoor work and use in the sun.
Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the file without a fight; SBR is firmer and holds the holder flat and neat in the bag.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday document holders for offices and meetings | Travel, outdoor and premium document holders |
If one book needs a cover rather than loose papers needing a holder, the product changes: our neoprene book covers wrap one book in a stretchy slip-on cover, and a document holder and a book cover are ordered from different patterns.
Office suppliers — holders in your colours for the offices you supply, made to your paper size, for workers who carry papers every day.
Corporate gift brands — holders printed with your logo that travel with the papers you give, made to fit your gift range exactly.
Law firms — holders in your colours for the files in your firm, so every client file arrives flat and your firm name is seen in every meeting.
Online office stores — a holder that photographs well, ships flat and fits a wide size range, for customers who buy office carry online.
When neoprene is NOT the right choice
Tell us which of these your document holder needs.
Will the zip bend the corners of my papers?
No, not if the zip is placed right. The zip runs around three sides so the papers slide in flat, and its teeth never touch the papers when the holder is opened and closed — send the paper size and we place the opening to suit it.
Can I add a pocket for business cards?
Yes. A card pocket can be added where you ask for it, stitched through the foam so it takes a card and a pen — tell us the pocket size and position in your drawing.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom document holders to your drawing, your size and your print, and we check the the fit on a sample on a sample before bulk production. The general minimum order is 200 pieces per design as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom document holders and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A document holder is judged every time the papers go in and out. Send us the paper size and we will make you a sample to try with real papers.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.